used to get between 65 and 75 miles per hour since the garage had the lead and pedal out of car 1 it seems the accelerator pedal now has to be pushed in a...
6437
armalite8
Apr 28, 2012 9:04 pm
I need to replace the pressure operated brake light switch on the actuator. I can't find it listed on the usual sites, but there are loads on eBay for about...
6438
dkcpgm
Apr 29, 2012 9:58 am
... Paul, the Mgo accelerator pedal governs the speed electronically via the injection system and has to be set up exactly - if the linkage has been removed it...
6439
sidecar_jon
Apr 30, 2012 8:18 am
My poor high mileage Aixam gets worked pretty hard, what with taking the Mother in law shopping and the lad to school and recently transporting bags of cement...
6440
thorpcross
martin_thorp...
Apr 30, 2012 3:10 pm
Jon, This is almost certainly the starter or the ignition switch. I had the same thing happen to me on my Ford Courier van, only I didn’t hear it due to the...
6441
sidecar_jon
May 1, 2012 2:54 pm
yep thanks for the advice and i've ordered a second hand starter £60 off Rossfields. I'm waiting in for it now...Oddly for Aixam the starter seems the most...
6442
sidecar_jon
May 1, 2012 2:54 pm
I meant to say ..i'm in Cornwall so a bit far away, but i'm sure your recommendation will be useful to some here...thanks....
6443
John Jackson
thermalsoareruk
May 2, 2012 7:00 am
Hi Alex, I have fitted SKF bearings to my 500 gearbox. They are Ok so far but only 4000 miles yet. The bearing behind the pulley is 6205 but a strong ETN9...
6444
Sparco
alex.sparco
May 2, 2012 10:16 am
Changed the bearing,same sound. I think is from variator.The rear clip escaped,and maked damage.I think the pulleys are not in line.I will buy a new variator. ...
6445
sidecar_jon
May 3, 2012 9:50 pm
Changed it seems fixed, indeed the new (and mankyer looking) starter seems to through is self into the engine with more gusto! Oh and to any one doing the...
6446
Sparco
alex.sparco
May 5, 2012 2:41 pm
Hi, I buyed a new gearbox variator,and now all is ok :D.Need just to change the weights because is 155 and i need 135 because the gearbox pulley is "sport"....
6447
douglas522497
May 5, 2012 2:41 pm
Glad to hear it but you have to think back to the original problem. The engine would not stop AND the starter was still running. No 1 suspect for that would be...
6448
aidan1889
May 9, 2012 7:32 pm
Hi All, Hope you're all enjoying the lovely liquid sunshine weather we're having! My latest little conundrum is that my little Aixam will no longer engage...
6449
sidecar_jon
May 9, 2012 7:32 pm
Yep that's one suspect, time will tell i guess, for now its been no trouble so far so good! I did jet a bit of WD in the ignition lock too....
6450
Sparco
alex.sparco
May 9, 2012 7:33 pm
Thank all of you for help !I have changed the bearings,the rear variator,and the brackets.One of the screws from short bracket(not pulleys bracket) was ripped...
6451
John Jackson
thermalsoareruk
May 11, 2012 1:21 pm
No spring on Ickle Car's cable, Aid (2002 500). There is quite a strong one inside the box which pulls on the cable. On this box if I put a large spanner or...
6452
aidan1889
May 11, 2012 6:38 pm
Thanks for the info JJ. I spoke to chap at Rossfields yesterday and he confirmed what you're saying. It was working fine although intermittently difficult to...
6453
dkcpgm
May 11, 2012 6:39 pm
Bit of a quandry here. I have a two and a half year old M.GO. The ribbed transmission belt has started to slip slightly on power take up. If I put my foot flat...
6454
John Jackson
thermalsoareruk
May 12, 2012 3:54 pm
Hi Aid, I haven't had the pleasure of replacing a cable yet. I believe I had to undo the adjuster nuts to get enough movement to unhook the gearbox end. Once...
6455
John Jackson
thermalsoareruk
May 12, 2012 3:54 pm
13000 miles sounds a looong time on a quad belt to me, Dave, unless they have uprated the belt by now. Get a spare anyway, for future use, and measure the...
6456
douglas522497
May 12, 2012 3:54 pm
The MGO has a slightly different (and more expensive) belt than the older models but the principle is the same for all micro-cars - Mine is an Aixam that I...
6457
douglas522497
May 12, 2012 3:55 pm
Remember when fitting it that correct adjustment is needed. First with nothing attached use JJ's method to confirm the box will change OK (do this while...
6458
jimmy.findlay@...
jimmy.findla...
May 13, 2012 11:26 am
Hi Dave, Just looked at my service booklet and the recomended schedule is to change the transmission and alterator belts every 12000 miles (petrol version). ...
6459
dkcpgm
May 13, 2012 6:12 pm
Hi Jimmy,just as I thought - my book (wait for it) states 50,000 Km yes thats right fifty thousand kilometers. I think that is why my service garage said that...
6460
pbc202002
May 13, 2012 6:12 pm
hi all i have desided to get a new crossline diesel so my 2006 is now up for sale top spec 22000m mot march 2013, ive had since april 07 £2495 ono birmigham...
6461
dkcpgm
May 13, 2012 9:04 pm
As mentioned previously some slippage of transmission belt. I was under the impression along with others that 10/12,000 miles was about the mileage when...
6462
aidan1889
May 14, 2012 7:16 pm
Hi Doug and JJ, Thanks for the advice. Too busy this weekend to sort it, but will have time during the week. Will keep you posted! Aid....
6463
James Findlay
james.findla...
May 14, 2012 7:16 pm
Hi Dave, I will check for the pipe tomorrow but it sounds like a breather pipe, have you topped up the oil lately ? you may have over filled the oil if its...
6464
James Findlay
james.findla...
May 14, 2012 7:16 pm
Checked out the breather pipe coming from the centre low on the engine up and over to the righthand side and finishes between the head and the air filter box,...
6465
armalite8
May 17, 2012 4:26 am
So I've had the mad red thing for a couple of years now and it's been an interesting relationship :) Unfortunately my family no longer fits in and I've had to...
