hi bro strokers.. nice number plate.. about those bodyworks, forks
and whatever u want to know about the pre-98 and 2002 RS250 model..
u can view at aprilia official importer in malaysia... moto millia
shop at bangsar there... :)

GhoST

--- In apriliars250club@..., "wgs9797"
<stroker97@h...> wrote:
> Thanks Sol, but I have a copy of Ride mag ( look it up, maybe you
get
> the rough idea ) which had an almost see-through pic of both 97
and
> post 98 bikes, it seems like the mountings are all the same on the
> chassis, except for the lower front end ( near the front
> sprocket/footrest, where there was a some sort of bracket holding
it
> to the chassis )
>
> The fuel tank also seemed to hae the same mounting points, and
since
> post 98 bikes do not have a longer or wider chassis than 97 bikes,
i
> presume they'll go on easily.
>
> About the clocks, don't the old original bracket would still fit
the
> newer bodyworks, since the post-98 bodyworks are much wider and
> larger than 97 RS250?
>
> So in order to have post 98 Showa forks I have to change the whole
> front end, right down to the wheels both yolks, bearings and
spindle?
>
> Or is there any way for me to tune the current forks on my 97
RS250
> to perfection? I am about 65kg dry, not including racing suit,
> helmets and boots. What about the rear end?
>
> 38mm flatslides is a sound idea...any one have done it?