You can set the sort order of messages? Just click on the link in the date column. Your preferences will be remembered, so you don't have to do it again when you return.
Does any one no whats wrong with my car! (i don't!) 1986 520i with rear disks but not ABS. When setting off from standing, the cat 'shuders' slightly but is ...
Have you checked the alignment? universal joint? That's first suspect. If not, look at control arm bushings-try kicking front tires from front to rear-see if...
i think the cat and the violent shudder are unrelated....the shudder could be a number of things. first check the inside of rims for mud or other off balance...
Hey. I really want a e28 for my next car. I've looked into the usual routes; Autotrader and whatnot. They seem to be pretty rare. Does anyone have any...
Hello Jon ... I have a low mileage, well above average condition e28 528i auto that I've been planning on selling for 6 months. It needs an MOT (it won't fail...
Jonno, You may well find more for sale on ebay than more "conventional" means. I got my 525e (well, 2 now - one went to the scrappies after becoming a donor ...
Hello all, I'm confused by the functioning of the auxiliary air valve on my 528i. AFAIK, my previous valve did not function at all, so we have replaced it with...
was the replacement valve new? if not I have another that i will send you for postage only( used) you could try it. be in touch... Damion e28 m5 "Arny K."...
Hi, It could be a temperature sensor that is giving you this trouble their input signal is vital to have the electronic engine controller give the right...
Hi guys, Spent the last two nights looking over the car to try and find where this "shuddering" ( betwean 45mph & 60mph) was coming from, And still couldn't...
Arny, I'm assuming your talking about the auxilliary air valve that has a bimetallic strip that is heated by the engine and a simple hot and ground circuit...
Hey mate I am selling my E28 528/535i if u are interested, it is very fast and in a great condition. if u are interested my mobile number is 0402 491 281, just...
... Well, this is not the case, this is a simple bimetallic strip air bypas. But now that you mentioned it, I was wondering which models exactly had that...
... I probably should do that, but what's keeping me from it is that I found out it's surprisingly complicated to remove that part. I'd need to find enough...
... No, it was a used one... this one is at least cracked open, the previous one was tight closed even in winter :| ... Thank you very much for your kind...
hello everyone could memembers sort through their photo album and delete pictures which are not needed as the photo section is getting to full and is exceeding...
I am hoping someone can give me a little help. I have a 1988 528e and my hood release is NOT releasing the hood! I pull it from inside the car and it won't...
Try this link: http://www.firstfives.org/faq/hoodlatch/hood_latch_faq.html This should help you understand what you might need to do to fix the issue... John ...
thrust arm bushings....replace with 750il ones whittled down....or a urathane good luck the payoff is worth it. Damion atmimp <atmimp@...> wrote: Hi...
hey Tim, do not rule out corrosion on the hubcentric part of ther hub, i had a set that was corroded and it did the same thing, i took off the rims and wire ...
All, I had my e28 fully loaded yesterday, and there was very little tyre clearance in the fenders. I'm currently running 205/60/16s, but was considering...
Andrew W. Hill
jessicat@...
Sep 11, 2005 6:56 pm
3867
... I have used several different types of tires in 225/50-16 on my 7.5x16ET20 wheels. There's adequate clearance even with my lowered suspension (Eibach ...
Andrew, I run them front and rear on 8x16 et 23. The rear fender lip is shaved, and the front wheels require a thin spacer (~3/32) to keep the tire off the ...
Hi guys, Just letting you know that I bought the lower and upper control bushings from Australia too a while back and I have not complained at all. Go to...
