Hi to all members, According to the testing information that I have received for these sensors I have the following. The harness on the sensor side has three...
Hi guys, hope you and your cars are running well. I'm planning on doing an engine swap in my '86 520iA and i need to know how many pins (terminals) there are...
hey guys. my driveshaft came out of alignment? does that sounds right? and i guess that the driveshaft is welded to the something and you cant repair the...
If you are going to the trouble of an engine swap, why not jump into the big 6 from a 535 or a 735? Not that much weight difference and you save the need to...
I've got rebuilts for about half that Steve Steve Haygood BMW CCA 6 Series Register Director 03/04/05 Official 5er Fest Sponsor 03/04/05 Official Sharkfest...
... If you're getting vibration and grinding sounds, it could also be the guibo between the transmission and driveshaft, and it could also be the centre hanger...
Hi guys... I have an '88 528e and have been having intermitten periods when my "check engine" light goes on...and then it goes off... With all the different...
Couple points on a BMW driveshaft. 1. They are factory balanced. Meaning both mated halves are then balanced. 2. They have the U Joints PLUS they have a...
OK, I got the first one out, mit sawzall, but apparently didn't use enough lube to press in the new one with the floor jack. There is some cautions on the web...
Here is a good site for more information on doing the driveline repairs on Fivers. www.firstfives.org/faq/driveline/driveline.html Gives information that...
I have a 84 528, and just replaced the starter, now the clutch will not work. Everthing was working just fine when I pulled it in. I am trying to restore this...
Please define what you mean by"it will not work" ? Is the clutch pedal on the floor ? . Did you remove the trans when you pulled the starter? Steve Steve...
Okay I replaced the starter now clutch will not engage, I then replaced the master and slave clynders and bled the system. the clutch pedal feels a bit soft,...
Hi Terry, It sounds to me like you've done what a friend of mine did to my 5er when i let him refit the starter while i refitted my inlet manifold! If you look...
Sounds to me like it still has air in the system - bleed it backwards - force fluid from the bleed screw backwards to the master cylinder. I do this with a ...
I have a 82 528i with motorsport options, the original recaros haev seen better days so I am replacing them with a perfect set of leather standard seats I came...
Dan, While I'm sure you're right, I had to press the thing out once, when using only diluted dish soap, so I went whole hog and used it undiluted. I guess I'll...
The brake lines look awful and I have some upgraded calpiers I'm rebuilding, so I'd like to do it all at once. Anybody know the longest run of metal tube? The...
Recently, I have been having major problems with turn signal lever. I think problem stems from the previuos owner switching steering wheels. I have 3...
anyone know the fastest and easiest way to remove and reinstall the muffler on a 87 535i? Brett Peavey Microwave Component Sources Ph. 904.721.3711 Fax....
... are you planning to do it yourself? I do alot of work myself, but mechanics and muffler shops ( my experience ) charge only minimal labor on the rear...
i am removing the muffler from the engine block...is there a gasket i need to replace or something? ... Brett Peavey Microwave Component Sources Ph....
I have always had good luck with AC spark plugs, they are long lasting and good quality. I know this is an old message, just wanted to put in a plug for AC...
Alex, did you find a bimmer yet? if not I have a nice 1984 528e, that needs a tranny. tons of new parts, excellent leather interior, minor rust. I'll...
I've had it done on one vehicle. Replacing the header, etc..I was told BMW has stainless steel studs (reduce rust) coming out of the block, I imagine you'll...
... From: "Mr. Dana Marc Sion" <dsion@...> To: <bmwe28@...> Sent: Saturday, June 17, 2006 19:09 Subject: Re: [bmw e28] turn...
Agent Midnight
agentmidnight@...
Jun 17, 2006 11:12 pm
4479
thanks for the response, somehow I didnt think it would be so simple. I do have an older, e28 , I can pick at for parts. But you also mentioned getting a new ...
