You can set the sort order of messages? Just click on the link in the date column. Your preferences will be remembered, so you don't have to do it again when you return.
Hello All, As a new member I thought I'd introduce myself. I found the EUG website a couple of days ago and have been returning to it ever since. I only have...
I will hopefully soon receive the last valve for my S870, the 19AQ5. Because some of the PSU parts were missing (mains ballast resistor, thermistors and mains...
I am reluctantly selling my Eddystone EC958 which is an early analogue model made for the 'Ministry' and finished in two tone grey . According to the amateur I...
I am a member and moderator of several other Yahoo groups and we are all having a spot of bother with Yahoo at the moment. This mostly manifests itself in...
Evening all Please could members trim messages so that a message does not have the previous six messages on the subject attached to it - and so does the next...
Hi Lou (and Nick), Regarding the 670 case, I have restored a ‘parts set’ 940 which was also missing its case (there must be a world dump of abandoned...
Thanks for that I have adjusted the fly wheel and it is silky smooth now and in fact the vernier dial is not catching now ,I just have to remove the glass and...
CAN ANYBODY TELL ME WHY I CAN ONLY GET UP TO MESSAGE NO 161 WHEN THERE ARE SUPPOSED TO BE 192 MESSAGES. AS I DONT SEEM TO RECIEVE MESSAGES COULD YOU E-MAIL ME...
I am now the owner of a green S870. Please see the pictures in the S870 album in the Photos section of this Yahoo Group website. Unfortunately it is in a bit...
Nick, I have been after some Wander Plugs for ages. I saw some on eBay last week but they went for silly money. Put a search out on eBay, that is one way. Also...
I have just received a fairly OK looking EB35MK111 (SN 0040) which I was ensured worked fine. Unfortunately there are at least two faults (or maybe they are...
Re: my earlier posts on EC10-2 / repair / low sensitivity, etc. Following a careful complete re-alignment of the IF and front-end, it now much healthier! Just...
Hi, could one of you experts give me some more good advice please? I managed to prise open my case thanks to your last good advice and now have the receiver...
Hi, any pointers on how to get an 840C out of its case? I've removed the four rear screws but nothing has become free or even looser. Do I need a hammer and...
Gentlemen, Recently acting as a distance learning apprentice to Gerry O'Hara in Vancouver I made a succesfull full RF, IF and discriminator alignment of my...
My Eddystone collection stared out with a 730/4, and I also have a 750. It seems reasonable to assume that the 750 dual conversion technology would have been...
Hi all! EC10 Mk. II. Tuning cord broke whilst other repairs were being undertaken! The manual (from the EUG Web Site) describes the re- stringing procedure for...
Hi All, I found one Eddystone 5500 in a surplus shop. I made a search in Google for the technical manual but I found nothing. Since this transceiver Xtal...
The EUG website is in the process of uploading the service manual for the IMR54 receiver. However the circuit we are working from is rather poor and difficult...
Greetings! The connector for the 670 (for that is what it is) has not been available for years. The best way to deal with it is to carefully remove the...
I thought the following mail string discussion on S.659/S.670 would be of interest to Forum members. The original question was recently posted on the EUG site...
I believe this to be the transistorised 230-870MHz set equivalent to 990% 25-230MHz VHF set. I have had one for some time. I have not played with it much. The...
Phil Hopewell left this message on our guest book this morning. Anyone able to give him good advice? "Great site,much useful info.I have just recently required...
Thanks for the info. about the diode GEX43. And ... another one! Can I use the same OA91 insted of the GEX13 ???, or there are a better substitution? Thanking...
