Diane, the big issue for me with GQRX (on an Ubuntu system) was setting the library paths correctly for GNU Radio, since the GNU Radio make script had its own...
Alex, thanks for the reply. Presumably QTHID only opens the FCD HID port, whilst leaving the FCD audio port to ALSA/portaudio &c. One way of looking at that...
Hi Mark Many thanks for the reply. That's good news. I sold my IC-910H to help finance a new KX3, so right now I can't run full duplex. The dongle looked...
Hi Robin, I agree that in most cases shared access tot he HID control interface is not necessary, but it is a convenient option. Alex On Fri, May 25, 2012 at...
... Hash: SHA1 Hi Robin QT Creator looks ok and you can edit the build script to change where the libraries are being found, I think the gnuradio version I...
Peter, I found the sdradio software good for AM demodulation http://www.weaksignals.com/ The software is old now but you should be able to demod OK, there is...
Make sure you go into the system tray in windows and in recording devices set the FCD audio level to 1 - I know it sounds a bit low, but it works best and if...
Alex, is possible for you to include libusb 1.08 source in the build of gqrx avoiding using default buggy libusb 1.09 ? This patch until libusb is fixed, in...
OKay, I'm about to give up. This is my 4th attempt to get this software running under Win7, and it's no-go thus far. Where is the sample rate set to 48,000??...
I am on windows 7 32bit Right click the FC button, delete the 98000 entery and add 48000 / ok The click start.. That works for me, shame about the rate, but...
Hi Mark The program does not say the FCD is connected, it just says "SDR not connected". Right cllick on th "FCD" button to set samplerate to 48000. 73 de Jos...
Thanks, Jos! I had never right-clicked anywhere...and I even read a good number of document pages! And I'm a right clicker!! It is now running....thanks so...
I am wondering if I have my center freq setup correctly. I am listening to an FM broadcast station on WFM and although the signal is loud but it sounds clipped...
What software are you using? HDSDR, SDR# and SDR Radio Console are the best to use. I find HDSDR and SDR# provide the best fidelity at this stage of...
Hi John that is precisely what is happening. The FCD is not designed for BC FM . Radio theory says a 75kHz deviation signal with 20kHz max modulation frequency...
John, taking what Alan has written further, you are being bitten by Carson's rule, and the propensity of commercial stations (and some public service ...
Hi guys, Thanks for all the advice. I am just glad to know that I have not screwed anything up. Now I have another question, I have my little THF6a sitting...
I always set my FCD sampling at 192 KHz regardless of what it is supposed to be... I get better fidelity that way with HDSDR, SDR Radio Console and SDR#. This...
Hello! My FCD is connect in a USB port and recognized My SOUND CARD exit is: SPEAKERS My SOUND CARD enter is FunCube Dongle (micro-phone) Waterfall appears...
Dear J, (would you be related to /Just The Facts, Sir or Ma'am/?), the short answer is absolutely not. The issue with the FCD is that the front end is quite...
/More facts:/ Forgot to add that setting all the gains on the FCD (pre-amp, mixer gain, IF gain &c.) to 0 is a good starting point if one suspects front-end...
John NS5Z, Further to the excellent advise you have received I add to Robin's comments, do not lose heart. I have my FCD running in "parallel" with my FT736R...
... This is the filter to which Colin was referring: http://www.satsignal.eu/wxsat/filters/HelicalNotch.htm I hope the information will be helpful. 73, David...
There are sticks out in the woods were you easy can sample over 2 megs of bandwidth .... stereo with rds??? No problem!! but that is not what this group is...
In which case the OS will upsample, but the sampled RF bandwidth from the FCD will remain resolutely fixed at 96 kHz, of course. ... In which case the OS will...
Yes! ... Yes! On 5/26/2012 6:38 AM, Robin Gape (FCD) wrote: Â In which case the OS will upsample, but the sampled RF bandwidth from the FCD will remain...