You can set the sort order of messages? Just click on the link in the date column. Your preferences will be remembered, so you don't have to do it again when you return.
Hi all, Let me start with wishing all of you a happy and above all healthy 2012. Finally this weekend my HF-converter got assembled and it works quite nice. I...
As far as i know the record is 36 hours from uk to middle of usa ... 3 days is normal Happy new year with your new toy (better say tool) Have fun with your fcd...
I thought that 1 week was normal for a letter, and 10 days for the last two small packages that I received from California, through regular postal service. ...
Dick: I noticed the same behavior, but as time has progressed, the later versions of SDR-console have handled the "Offset" much better (the recorded filename...
Hi Mark, thanks for your response. I had tried playing the recording (build 849) using build 879 with the same result. But I had not made a new recording using...
I try KD5RXT's description for new FCD setup. Unfortunately I get stocked by configuring SpectraVue. I cannot change SPAN any higher than 9600 Hz. The setting...
pablos673 (hb9axa): Double-check your settings in SoundCard In Setup section. These settings constrain what you can set for Span & Center. Let me know if...
I am guessing you are a new fcd owner Spectravue and fcd frontend together ... ok that works BUT What I found easier is to use any winrad clone (or sdr radio...
Yes, I found Spectra vue unusable for Funcube. Go to HDSDR, download the software, and the DLL for FUNcube under the hardware link, and away you go! It is...
Tnx Siegfried and Leroy for your hint, I'll try HDSDR 73's de Paul AXA ... Tnx Siegfried and Leroy for your hint, I'll try HDSDR 73's de Paul AXA On 02.01.2012...
I found hd-sdr unusable. I couldn't get it to tune frequencies on the FCD. I have had much better luck with sdr-radio. For the record I tried hd-sdr 2.11...
Dont forget you need the FCHID to set the frequency. Spectravue does not have a special hook to the FCD, as it does for the SDR-IQ. Also it depends which...
HD-SDR is a good starting software for Funcube Dongle. I started with this one and I liked it. You can start with it also. SDR-RADIO is a much better and much...
Hdsdr is very useable ... was the first soft together with orbitron (for doppler correction) with that i could receive AND DECODE telemetry of arissat .......
... [] ... Keith, HDSDR works perfectly with the FUNcube dongle, and is low on system resources. It tunes frequencies correctly, and has an easy-to-use ...
Salute All! I know, that to you any supervision over last days are interesting to a life of the satellite. I place the supervision on FTP, in format SDR...
David, Thanks for your suggestions. I did have the ExtIO dll (from hd-sdr site not from yahoo group files). I didn't play with hd-sdr much since it seemed not...
An agreement has now been reached with ISIS Launch Services BV, who are based in Delft in the Netherlands, for them to provide a launch of the FUNcube-1...
... Seems strange, Keith. I'm using 18i here and HDSDR and IIRC I've tested that both on XP and Windows-7/32, and Windows-7/64. SDR Console is just on the XP...
FCD + WRplus I observed satellite ARISSat-1 on a falls. The telemetry was absent, voice messages were not legible, very silent and interrupted. Most likely, I...
Konstantin, Thanks for the report. It does not surprise me as I listened for it on Monday and didn't hear very much. I am glad I was able to receive good...
Thanks for the reports, I had some good SSTV and voice data yesterday (Tuesday 3rd Jan). From the Arissat website, the last telemetry received is:- ARISSat-1...
