Just as an "easy to try" test--if you unplug your FCD and plug it back in, does the image go away? Mine hows a very big image (equal to the correct one) if I...
Great tip! It looks like something is getting corrupted in FC firmware if it's not started in just the right way. Plugging in after reboot, running FCHID to...
Thanks Graham I just happen to use Logmein free and have skype to hand I can even get it on my iPhone when I have a wifi internet connection, O2 will not Allow...
Pretty sure this "feature" is due to my failure to properly reset in suspend/resume. That is why removal and reinsertion works. Very occasionally if it isn't a...
Hello FUNcube Dev's, I am a little lost, I have an initial "manual tuned LO" configuration working - Fun stuff. This is a fun and fast paced developing...
I had it built and running from scratch on my Mac a few days ago perfectly... all you need is Qt Creator and Xcode. Build the code in QT Creator. Xcode just...
Hi take a look in the file section, all files are the latest,and in order, and take a look in the guides section for all the manuals and setup guides. Old...
Hello Alexander. In the www.funcubedongle.com downloads section. QT cross platform source code. You need QT Creator and Xcode to make it as it is supplied as...
What your best to do is look in firmware section and update this to the latest revision, and look in the FCD frontend section and download the latest revision....
Hello Eldon. In 18b and 18c, there was no way to determine the version on the FCD without attempting to call one the single new API of 18c and see if you...
Don't know if this helps with the firmware bug, but I think I found the problem in my code. I'm using libusb under windows instead of the windows internal HID...
Hello Eldon, I was yesterday in same position as you describe: after a firmware update to 18d, FCD seemed dead... So I disconnected it and reconnected to the...
FCD #200 arrived today and is running beautifully. I updated the firmware to version 18d and installed Moe's SpectraVue 3.09. With no antenna, the noise floor...
Hello Mark, Thank you for your comments and suggestions! Yes, it would be a shame for the unit to remain unused since there are so many folks who are still...
Hello JP, The FCD is my first SDR experience (experiment? Hi!) thus far. I think you'll need some gain on the LNA...and with my discone I *cannot* work the...
Hi Mark, Nice comment, I also have a lot experiences on FCD with WRplus during past weekend worked with many birds with Arrow antenna. I will try 18F firmware...
Hello I'm wondering if anyone who lives in the US who made a purchase on the 14th of Jan has recived their funcube? Seems mine made it to NJ but it hasn't...
Hi Mark, From my experience the unit has plenty of gain - in most areas it just needs a decent filter at the front end - certainly at VHF...then you should...
Great comments, Graham. I concur. What I didn't say was that my preamps are "good band specific ones"--low-noise GAsFET units from ARR and Landwehr, so they...
... I have compiled and run the QT4 code controller successfully in Ubuntu 64 bit so it runs as a native app., with no problems after finding out how to...
