This has bothered me since the FCD got handed to me. with SDR-Radio and Ham radio deluxe i can achive some sort of scanning. Thou slow compared to a actual...
This has bothered me since the FCD got handed to me. with SDR-Radio and Ham radio deluxe i can achive some sort of scanning. Thou slow compared to a actual...
Please read the "mission statement" for the FCD, It is NOT intended to be a cheap scanner. The slow scanning is most probably limited by hardware. You cannot...
Hello janne and alan There IS a software for scanning with the fcd Here a text from the description This utility is for scanning 2m, 70 cm and Air bands. It...
Actually i have 2 different software that do scanning with the fcd ... From the first one: This utility is for scanning 2m, 70 cm and Air bands. It works...
Sadly no linux version What ci have is from one of the 2 scanning soft an "early version" (that one that is working with spectravue from sa0and) And in that...
(response inline below) ... I'll chime in here as well with my experiences. At home I live about 1000 feet from municipal government offices. There are...
I saw the gain/phase image rejection plot first time. Using Googles public DNS 8.8.8.8 and 8.8.4.4 and FireFox 9.0.1 (about to update to 10.something no doubt)...
Should be a nice bit of software for the AMSAT-UK FUNcube Dongle http://www.uk.amsat.org/4313 <http://www.uk.amsat.org/4313> AMSAT-UK publishes a colour A4...
I was doing great right up to "Run MixW3 at 1200 packet using VAC as audio in. I can't seem to figure out how to get MixW3 to do the VAC as Audio in part....
I honestly can't recall, and I can't see my system to go menu hunting. It's in a menu option....keep digging is my only advice at the moment. That being...
What operating system are you using?? I ask cause in several setups you do NOT need vac (use stereomix, masterout, what you hear) as default input and...
Okay, I'm at home so I can run through the menus: Configure, Sound device settings..., Input, Line 1 (Virtual Audio Cable) Hope that helps, Mark N8MH...
Hi Simon, The screenshots are in the photo album with the name FCD and Vista. As you can see, the FCD is connected via the FCHid.exe but not visble in the...
Well they should be visible in SDR-Radio's console, to be honest I now have no idea what's wrong. Start SDR-RADIO.com, from the Windows pane in the Ribbon Bar...
It would be nice if Howard provides some custom communication protocol -other than sound card- that timestamps and tags the packets with the current LO...
Hello Youssef ... I think the main problem here is that it would mean developing custom cross platform USB host drivers to support this raw mode. One of the...
Hello Howard, I'm aware of that. It's very frustrating. The new mode I proposed would have solved the problem and opened the door for yet unknown usages. What...
This may be a wacky idea, but couldn't the Funcube just return a 3 channel audio stream instead of two channel? I.e. rather than returning I, Q (mapped onto...
Hmmm ... you set the tune qrg via software ... right? ... so you have it already in the pc... why send it again back from fcd via the usb port? Dg9bfc Sigi...
5944
Alex DEKKER
effseedee@...
Feb 4, 2012 7:28 pm
... It's not wacky, it's lateral thinking. A simple and elegant approach to the problem. I like it. ... Yes. Well written software should just ignore the...
Answering a question asked off-list: I used SDR-RADIO.com (see website) with a NetSDR from RFspace located in Poole, Dorset with an old Datong active antenna....
... It is a good idea, unfortunately there is no standard defined for transporting >2 channels over USB (I've just re-read the spec :), such interfaces are...
