Hi Brian

The super, super, delux, GTI, ghia, blue chip, all singing all
dancing, crankpin.

I will make the ends 1.44 if you require but a suitable working
clearance (Next drill size up as stated in the instructions) would
probably be 1.5mm. Give me a ring if you want to discuss or I could
go into more detail here if anyone asks

Regards Phil
--- In masterchassis@..., "polybear2123" <polybear@...>
wrote:
>
> --- In masterchassis@..., "hhpja" <phil@> wrote:
>
> > The old style
> > Romford, now Markits, where you solder a thick brass washer onto
the
> > crankpin is 1mm. The new Markits one is I believe 1.67mm (can
anyone
> > confirm?)
>
> Hi Phil/all,
>
> I've just received an email from Mark Arscott on this issue, to the
> following effect:
>
> Markits "Superdeluxe Slotted Threaded Crankpins" (which now replace
> their "Slotted Threaded Crankpins" with Plain [not threaded]
Crankpin
> Bush and 14 Ba nut) consist of a 1.0mm (14 Ba) Crankpin with a
Slotted
> Threaded Crankpin Bush to go with it; the latter having a 0.057"
> (1.44mm) turned outside diameter.
>
> Hope this is of interest.
>
> Best Regards,
> Brian Tulley.
>