hi there everyone just joined today just to say hello.I have owned a mazda two litre petrol hatchback 5 door 4 cyl.since year 2000 new it was a import to this...
Hi there, and welcome to the club.. If the car was running fine before you changed the fuel filter, and cleaned the plugs, then my suggestions are that you...
Thanks john but i do not think i have dis lodged anything The car has been a bit lumpy before i did the fuel filter.but not as bad asit is now the filter has...
Hi Andy, The TB is the throttle body, might help to spray some carb cleaner in there, and use a small paintbrush to give it a good clean.. I would also use an...
thanks john I will try your advice. ps.I COULD NOT FIND THE RELAY TO DECREASE THE FUEL PRESSURE, DOES THIS MATTER AS I JUST OPENED THE PETROL CAP TO DECREASE...
For sometime now, my front wheel hub bearings(taper roller bearing- koyo 4272) have been noisy despite repeated lubrication. My mechanic recommends the...
Hi Chiedozi, and welcome to the club... The Mazda part number is H266-26-151 and in the UK is £84.30 plus 17.5% tax. As for changing the type of bearing, I...
Or find your local bearing supplier and give him the Koyo No (Albion transmission on Carlton Ind Est, John) and he will tell you which alternative makes you...
Hi everyone, New to the club, just came over from Australia. I bought a 95 626 2.5 V6 GT model last week, just wondering if anyone knows a good place to get...
Hi Stanley, and welcome to the club.. Same car as me then :) Most body, brakes, interior and electrical items are the same as all 626 GE models, and there are...
Hi John, Thanks for the detailed introduction !! Man, you must be an expert on Mazda 626 (obviously), the manufacture date on the owner manual was 30/12/94......
Hi Stanley.. Firstly, dont bother with the tailgate struts... you can get new ones for that price.. there are a few places to get them.. one is GBA Automotive...
Hi John, 7 mpg ?? man, Ferrari can get better fuel consumption than that. I am not sure if the term lead foot is suitble in ur case, probably not heavy enough,...
I fitted a inline fuel filter to my mazda 626 2 litre w reg 2000 model I thought i had a air intake at the top of the filter would this cause the car to chug...
Only other thing I can think of is the injectors, AFM, Distributor.. You could take the car to your nearest Mazda dealer, and let them plug in the diagnostic...
Hi all, I have just bought a remote central locking kit for my 95 626. Does anyone know whether or not I will need an actuator for this kit to work? thanks. ...
Hi Stanley, no, all the doors have actuators in them... you don't need anything else. The wires you need to connect to, are negative switched, and can be ...
John I have posted on this subject before and was able to get the motor moving by giving it a light tap..unfortunately it appears to be jammed up in the raised...
Hi Tom.. It's probably worth taking a photo of the inside of the door to use as a guide when refitting it... cos' i'm pretty sure you are going to have to take...
john..agreed but have you any idea whether the type of motor fitted in the GC 626 was fitted to other mazda models ie 323,or later models of the 626?? Cheers...
Hi Tom.. The motor itself might be the same, but I'm pretty sure the mechanism will be different... and I don't know if the motor would seperate from the...
Hi Guys and Gals.... I'm new to this site as I've just found it..... I'm based in Essex UK and have recently purchased the ultimate fun driving machine...My...
Hi Funkymonkey, and welcome to the club.. I have had a look at your pics, and it looks a minter.. very nice :) If you think yours is bad on fuel, I run a GT...
Hi Guys, well to be fair, I fitted them before Xmas, and they have made the biggest difference to date.. What are they I hear you ask? HID lights.. not the...
