You can set the sort order of messages? Just click on the link in the date column. Your preferences will be remembered, so you don't have to do it again when you return.
Thanks John, Luckily I found one in Manchester who sold me an EREBUNI kit for 500...Im waiting for it next week. Any good body paint shop in Birmingham?...
Ha ha.. Saw that on Ebay... another guy I know got one for his MX- 6... not a bad price really. There is another guy who lives in Birmingham, so I'll ask about...
Hi Andy... I'll leave the message open, and if you want to put more details about the car, use the database... there is a for sale section in there.. John...
hi, i have a 7 seat estate available for sale, just done recent head gasket due to leaking radiator, good runner looking for around £200, have listed it on...
A few weeks ago I came to the group with an electrical problem in my 2000 Mazda 626. Unfortunately the problem still exists. However I have observed more in...
hi, with regards to your 626, have you tried the electrical switch part of the ignition switch. i know when i worked for a mazda dealer, we had some problems...
Hi there... I think the "clue" is the dim lights, when you have the faulty starting.. This could be a faulty battery... have it tested properly, and mention...
Hi John, This is the reply I got from my mate.. The place is called Repair Solutions and yes it seems to be one of our sites www.repairsolutions.co.uk. They...
I replaced the battery today and the problem still exists. However it starts fine at the moment. Could be because the battery is fully charged though. However...
Just connect a multimeter across the terminals + to + -to - (switched to the DC range) while the car is running the reading should not be less than 14 Volts,...
Connecting a meter across the battery will not test the condition of the battery... but will test the alternator if charging properly.. (over 14V) the way to...
Well everyone. The electrical problems are a thing of the past, I am pretty sure of it. I double checked the wires with a clean mind and I found out that my...
The engine shaking, could be worn engine mounts.. normally the rear one.. As for the cause, possibly still got a short or a bad earth somewhere, but at least...
John, How hard is to replace that mount. I am not sure if I have enough expertise for that. So this is still an electrical problem? ... [Non-text portions of...
The mount isn't too hard to replace, just a few bolts... getting to it is the hard part.. And if it only judders when the fan comes on, I would say it ...
Hi all I don't know if I am being really dumb, but I have a '99 (UK V reg) 626 2.0 GSi Estate and I am trying to change the rear pads, but I can't find the...
Hi there, and welcome to the club... The caliper looks just like the older one, and does have the adjuster in the back.. ( I looked in the Mazda electronic...
Hi, I havent been following the other posts but i do have the workshop manual for most of the mazda models. Here are some pics of the brake assembly. Don't...
Thanks for the help and the prompt replies- as it turns out, the back calipers on my car really are different. Fortunately I managed to work it out before...
Hi John, I have changed a new ignition coil, problem still existed. Don't know what to do now? I have checked with many mechanic, the changes of ECU failure is...
Hi Xavier, Only other things listed are... Fuel pump (possibly) Fuel Pressure Regulator (doubtful) Airflow Meter stuck (very doubtful) The fuel pump stopping...
Hi all has anyone tried the Mazda Technical Information System CD-ROM (as sold online at http://www.workshopmanuals.co.uk/workshop_manuals/cars/mazda/mazda_tec...
Hi Chris, These are the Mitchells manuals, and I have them on 2 CD's.. Took one look, and never used them since.. They are no way as detailed as the genuine...
Hi John, Do you mean the main fuse box at the back of battery? If so, which one is the main relay for fuel pump? If the failure from fuel pressure regulator or...
Yes, the fusebox behind the battery.. Looking from the side of the car, its the nearest to the side and towards the rear of the car.. You are right about the...
Hi John Sorry to jump in so where did you get your manuals from? Are they the same one but different source? Are the haynes manuals better or worse than these?...
Hi Nick, and welcome to the club.. If you are talking CD's, then I have the Mitchells, which are OK, but just general service manuals like the Haynes, both are...
