You can set the sort order of messages? Just click on the link in the date column. Your preferences will be remembered, so you don't have to do it again when you return.
Hi 626 'rs, Got me 626 2.0 i exec M (95) about 15mths ago and didnt think the alarm/immobiliser was functional, Doh! , until I took the battery out for an...
Hi Tom, and welcome to the club.. Sounds like you are missing the key fob for the alarm.. to turn it on/off... As a guess, I would try turning the key in the...
... Hi John, That's well appreciated. Other than the handbook, the Haynes is the only literature I've got on the 626, but from past experience I treat them...
That's handy to know Bill, i know where to come if i have problems with my 1962 Spitfire4 MK1. Paul ... Hi John, That's well appreciated. Other than the...
i am going to replace the standard clarion radio with my alpine flip front cd, i have sourced a wiring adaptor off ebay, but i have a question regarding...
Hi Matt.. Basically, it's just a case of getting the Alpine cage to fit right... you may have to cut some of the dash in order to do it, but the hole is still...
... with my 1962 Spitfire4 MK1. Hi Paul, Always happy to help where I can. I have more experience (a LOT more) of Triumph engines than I have of Mazdas!...
i have just bought a mazda 626 glx 1992 and i have started work on it,i have wired a new radio as it had a loop system in there already but i cant get the ...
If the aerial worked before, check the wiring.. later models have a red wire with green stripe that works the aerial.. you will need to check which wire from...
The std oil is a good quality 10W-40 semi-synthetic.. change every 6000 miles, or sooner.. and always use a genuine Mazda oil filter... for the price, it's not...
discovered that the previous owner left the timing belt cover off,and oil is leaking onto the alternator and water pump belts,i have tried buying a replacement...
There shouldn't be any oil behind the timing belt cover... sounds more like an oil seal has gone.. As for the cover, the engine was from 91 - 97 so any should...
I've been working on & off removing bits of my 1993 engine, gradually getting near to taking off the head. Progress is slow due to weather and fitting it in...
Dont think it's the pump. most like is a poor fitted cover as you say.. It's a good idea to replace the water pump anyway.. as you will appreciate the amount...
What I initially thought was HLA's Trouble is it now is a vibration on the idle but on acceleration it seems to dissappear. Someone suggested it might be the...
Hi Quinton, and welcome to the club.. Firstly, the brake pads... I can hartily recommend Mintex pads, and readily available in most motor spare shops, or can...
Thanks John. Will check out the pipes etc as soon as I can. The car does run Ok but there seems to be a constant rattling sound even while driving or idling....
Hi - Just wanted to say thanks for the prompt reply after I posted the 1st time. Cheers John. I found out from Mazda here in Cardiff that the immobiliser was...
Hi Tom... glad to be of help... I presume the alarm is now turned off... but I still think you are missing a keyfob... Is there any identifying sticker on the...
I had to get a new keyfob as when i bought the car it only came with one key, and that was twisted. It cost £43.00 inc programing from main Mazda dealer. They...
i am confussed on when i should check it, ie when the engine is hot or cold or when running or not,the level is over full when stopped and at the bottom of the...
Hi Matt.. The proceedure for checking the ATF level is as follows... Warm up the engine to normal temp.. press the brake pedal, and shift from P to R,N,D,S,L...
