please can anyone help i desperatley need a maintainance/repair manual for my new mazda(it didnt come with one)and does anyone know why after leaving my lights...
Hi Helen, glad to have you with us.. :-) Manual... yeah, funny peculier, as I just uploaded one tonight !! It should be near enough for your model, which is a...
Hi All After doing some considerable research in to the MAF sensor and how to clean it, I finally decided to give it a go today. I primarily follwed the...
Thanks so much for that. I'm a newbie and this is exactly what I'm looking for as I need to do my cam belt before I get a nasty suprise off it. Mine is a GE...
Thank you. The manual doesn't mention anything about locking holes where you can screw in bolts to lock the position of the cam sprockets and crank. Other cars...
thanks, I'm going to do it during half term in case it doesn't get finished in one day. (We only have 1 car. I can go to work by motorbike but the kids need...
Timing belt original is made by Bondo, but any good quality belt will do the job... same for the pump, pattern parts ave available.. Unless the bearings are...
Hi, Having just bought a 1994 1.8 Mazda 626 GLX Saloon, I'm new to the Mazda world. I'm fresh from the ford world and am blinded by the masses and masses of...
Hi Simon, and welcome to the club... Wheels... ah yes, 5x114.3 PCD 45 (ish) plenty to choose from really.. most Jap 5 stud wheels will fit.. Toyota, Honda,...
Good evening Gents, I have a 1993 626 with a 2.5L V6. The transmission is slipping out of gear for about 1.5-2.0 seconds between second and third and I no...
Hi Cory, and welcome to the club.. I know it will cost a small fortune to have your original tranny overhauled.. and as you have one sitting there, it would be...
John..Im back again!! Looking to fit new discs and pads,after I got an "advisory" at the last MOT re pitting and judder through the brake pedal. I have the ...
Hi Michael.. I just had a look in the parts catalogue, and yes, it looks like the hub has to come off to change the front discs.. That nut will be very tight,...
If I may chip in on this point, I had exactly the same problem on the last MoT with my 1984 Coupe (MAZ 6261, John knows the one!) My little man has his own...
My ha'pennorth- Getting the hub nut off a 99 626 which was probably easier than yours will be, I ended up jumping on a length of scaffolding pole over a 3/4"...
I have recently bought a 2nd hand 626 GXi 2.0 16v about 96000 miles on clock it is a 1996 N Reg model. I am VERY pleased with the car drives extremely smooth...
Hi Carl, and welcome to the club... I'm glad you like your 626, they are really underestimated by the critics.. and once you have driven one, you realise why.....
... The brake warning light could be coming on under heavy braking because of worn front pads if the wear detector wires are still in place. Another thing to...
Hi Chris thanks for the maths tip or is it physics?[neither of which I was any good at,at school!] Depending on how I feel at the time I might just let "My...
Thanks for the advise John, but it turns out the salvage 626 has a manual gearbox so I will have to keep looking for another solution to my problem. Unrelated:...
There isn't a pad warning connection.. only for low fluid and handbrake.. The pads have a squeal warning.. the metal spring retainer contacts the disk before...
... Took the words out of my mouth. Also more reliable, IMHO. I had a Vauxhall (GM) Carlton (don't know if that's equivalent to any US models) which at 60k...
That's so wierd. I've never known a car with a low fluid level light. The ones I've had have always had a special spongy pedal feature instead ;-) Pad warning...
