Hello, My check engine light comes on intermittantly. Performace / mileage are fine, though at idle there is an occasional stutter. But it does not stall....
Hi there, and welcome to the club.. On a 2001 model, it will be OBDII, so you will require a special code reader.. depending on your location, you may be able...
Hi, everybody, i have just brought my first mazda 626 (1992) glx abs, only covered about 20 miles in it up to yet(to work and back)seems like a great car,...
Hi Chris, and welcome to the club... There isn't a manual to download... or at least I don't know of one. However, I do have the original factory workshop...
... one. ... there ... the ... quality ... on ... doing ... later ... Hello John, thanks for the quick reply, service history on the car is pretty good, it's...
Hi everyone! My name's Jay, I'm 24 and from Durham in the northeast. I drive a 1992 626 GT 2.5 v6 and I love it. I had a 1993 626 2.0 GLXi about 18months ...
Hi Jay, and welcome to the club.. Glad you like your GT... Iv'e had mine for about 9 or 10 years, and she still brings a smile on my face everytime I drive...
hi, just few days ago, my 626 can't start, i found that there are no power supply to the fuel pump. i have temporary connect a power from the ignition switch...
Hi Xavier.. The fuel pump is controlled by the ECU, but is taken through 2 relays.. The main relay, and the circuit opening relay.. looking from the side of...
Hello again folks. It's big service time again (the old girl has done 9000miles since 13/12/06) and the rear brakes are due some attention. They are a little...
Hi Denzil. Fairly straightforward job.. jack up the back end, and release the handbrake fully. remove the bolt on the back of the calipers, and there will be...
I have a 1993 Mazda 626 with a drivers side power window problem,when I activate the switch the window won't move but the motor makes a heck of a noise.I...
Dear Guys and Gals; My 1993 Mazda 626 drivers side power window doesn't work,when the switch is activated it makes a hell of a noise but the window does...
Hi Murray, and welcome to the club.. The cable may have snapped, or come off the pulley... maybe even broke the runners... either way, the cable could have...
Thanks john, Nice and simple. I would have stripped, cleaned and reassembled the lot and still never found the adjuster if not for you. Ta. (PS: I've just...
Hi My 626 wouldn't start the other day it just turns over and doesn't fire. I've checked the spark plugs and the seem to be giving spark. I also put a few...
Hi Kev. Looking from the side of the car, the FP relay is bottom right, (green). and the main relay is the next one up, and slightly left (yellow) Also, if you...
... thanks john also how do i bypass the ignition and power the pump directly to see if it is functional. the pins on the pump are a,b,c,d in the manual....
Hi Everyone Has anybody got any idea as to whether 5 stud steel wheels off a Ford Scorpio with 185/70/14 tyres will fit a 626? I have seen a set locally with...
Hi Everyone Has anybody got any idea as to whether 5 stud steel wheels off a Ford Scorpio with 185/70/14 tyres will fit a 626? I have seen a set locally with...
Hi Everyone Has anybody got any idea as to whether 5 stud steel wheels off a Ford Scorpio with 185/70/14 tyres will fit a 626? I have seen a set locally with...
I doubt it.. although the Ford Probe ones will fit.. as will most Jap 5 stud wheels, with maybe a little work. You need to find those that are 114.3x5...
