You can set the sort order of messages? Just click on the link in the date column. Your preferences will be remembered, so you don't have to do it again when you return.
I've checked inside the cap and the inside looks clean. The points do seem to have some rough buildup on contact side. It doesn't look normal to me. I could...
It is normal for the buildup on the dizzy cap, and this should scrape off easy enough.. either way, they should be easy to get hold of... Your local motorist...
hi all can anybody tell me where to get a replacement caliper for mazda 626 on x reg year 2000 passenger side rear these seem quite expencive thanks for any...
Have you tried "Mazda Spares".. details in the links section on the left.. basically a scrap yard that speciallise in Mazda and Mitsubishi cars. John...
Hi and thanks for return of mail I got one yesterday for £ 45.00 plus vat plus 30 pound surcharge from my local partco company which I thought was quite good...
reading the site today with ref to remote key fobe. i need a new one 2 things best price original mazda or patient part, and how do you programme the new one....
Thanks, Have checked again, and I can feel a charge leaving the wires, two of them. They are the same ones which have the corrosion. Not a coincedence I think....
No idea on best place for fob, but check the type of alarm fitted, it may be Cobra or Laserline.. The programming sequence is something like leave the door...
Hello, I've changed the ignition wires and no difference in the running. Still idles rough - even at high idle - and on load it is very rough. Now scratching...
HI IT SOUNDS LIKE SPARK PLUG TO ME IF YOU DONE LEADS AND SPARK PLUGS THEY DO GO ANTI CLOCK WISE WARM UP FOR A LITTLE BIT THEN TRY BE CARFULL AS NOT EASY TO GET...
When you remove the plugs, undo about a 1/4 turn, spray a little WD-40 down the side of the plug, then back in a 1/4, then out a half turn and keep working in...
Thanks, will check that. When I said tight..I meant that it wouldn't budge. Probably overtightened by the mechanic that did the last service. Mind you, as I...
Hi all 626 lovers! I'm looking for a rear parcel tray for a 1997 (March) 626 GXI. The car interior is a dark grey, but if you have one of a different colour ...
Hi there, and welcome to the club... Depends if your car is a GE(92-97) or a GF (97-99) model... quite different cars. If it is the older one, then I should be...
Well could not get plugs out. Tried spraying a bit of WD40 and then doing a gentle push for a minute and would not move. They are in there good. But whilst I...
Hi if it is maf sensor these are very dear I have one from 1996 mazda 626 you will need to find out what one it is as there is I think six types take pic and...
SORTED!! Well, I checked the intake for cracks and found none. So again checked for vacuum leaks. On the number 1 piston I could hear a hiss and with spraying...
I am glad you sorted as it is a pain in the rear I had the some sorta thing but mine was the maf sensor so I broke a car with one in and used for spare glad...
Hello together, nice to see that there are some more enthusiasts in UK for the lovely Mazda 626! :o) I bought my 626 Hatchback(1998 model) four month ago and I...
Hi Mathias, and welcome to the club... For a moment there, I thought you were in Germany, until I read the message title again !! One of the best scrapyards is...
Hi John, thanks for the link! I will check that tomorrow! I hope they are willing to send this bits and pieces too as my experience so far has been either...
Hi Mathias.. If you have the master key, then you should be able to get another one copied from it (immobiliser wise) Any local key cutting shop will be able...
Hi John, that is what I wanted to hear! :o) I have a keycutter nearby who is advertising that he has transponder keys and that he is doing Ford code copying....
