Hi John, thanks for the link! I will check that tomorrow! I hope they are willing to send this bits and pieces too as my experience so far has been either...
Hi Mathias.. If you have the master key, then you should be able to get another one copied from it (immobiliser wise) Any local key cutting shop will be able...
Hi John, that is what I wanted to hear! :o) I have a keycutter nearby who is advertising that he has transponder keys and that he is doing Ford code copying....
Hi John, just to complete: The local key cutting shop was able to do it! In comparison: Local Mazda POS: appointment needed, car and key has to be left there...
I've just done the timing belt and breake discs on my 626 Auto GF 1999 2.0 hatch. Started up and ticked over lovely for 30 minutes. when I took it for a test...
There isn't a cutout as far as I know... more than likely something has slipped, either the timing belt as you say, or the distributor... (If it has one) John...
... i'd put the guide plate on back to front, which had frayed the belt and clogged up the crank pulley with fluff causing the belt to slip. That's what...
... Let's hope so. I'm guessing that if there was a bent valve it wouldn't shut properly. Given that all the clearances are spot on I'm hopeful but the proof...
... wouldn't ... hopeful ... crank ... just managed to get it together before the dark and rain set in this afternoon. She's fine and is running sweet as a...
... They must be pretty 'safe' engines as |I measured teh slippage and the crank was 160deg in front of where it should have been and no damage. Happy new...
Hi everyone I am looking to get a 98 or later 626 Estate in a year's time or so. Currently my cars are: 93 323 Estate 1.6i 92 Efini RX-7 90 MX-5 1.6 71 RX-2 We...
Hi Martin, and welcome to the club.. A nice set of Mazda cars there ! mmm, RX7.. very nice motor... but not as a daily driver really.. although many do.. ...
... Thanks John and everyone ! I love the RX-7, and theres nothing wrong with it as a daily drive, IF its kept standard (many arent) and if you can afford the...
... Following up on what John says about GE models versus GFs, I now own a GF 1999 2.0 auto and I used to own a 1996 manual 2.0 GE. The GF model is nice, and...
I have to admit i'm not as clued up on the GF models, but would imagine they have at least a drivers airbag, and possibly a passenger airbag in the dash, there...
Hi Martin & welcome I've had a look at the manual on my '99 Estate GSi, there was traction control available on 'some models' though it doesn't say which ones-...
Hi to all out there. I snapped the key in my 95 executive 2 days ago... bummer.... I managed to retrieve the broken piece from the lock with a trusty long...
Hi David, and welcome to the club.. The Imobiliser is built into the ECU and cannot be disabled.. Have you tried sticking the old key head on the side of the...
Hi there and cheers for the quick response (at New Year too) Just going to try and keep the keys connected and see how we get on, will let you know. Cheers...
John I only have to have the master key in contact with the new key as I turn the engine over, then it can be removed. Joy. It will do until I can get a key...
It's quite possible Timpsons will be able to supply a key... I know they can code them, either way, the blank keys are about £15 from the dealers, although...
Hi John. Its been some time since i posted anything and used to come on as "The Saint" fr Malaysia. Still Have my GD 626 91 with me and its just getting...
Hi guys... I have put a few items on ebay, which start on Wednesday for 10 days.. Headlight and foglight Protectors Leather seats Walnut dash with electric...
