You can set the sort order of messages? Just click on the link in the date column. Your preferences will be remembered, so you don't have to do it again when you return.
Hi Adrian.. You are going to have to ask round the breakers yards, or use the find a part services... they are going to be pretty rare, and still quite ...
Hi All Have a Mazda 626 GXi 1998 (newer shape). Was thinking of getting my Timing belt replaced, and possibly the water pump as well. Anyone ever had a water...
It is recommended to change the water pump as a "just in case" situation.. the cost of replacing a pump on it's own is only high because of the labour, so...
Hello everyone. I just ran across this group and thought I would join up. So hello from Idaho - USA. We have a problem with this 626 to the point we are...
Hi Don, (and Shelley) and welcome to the club.. Firstly, I have to say there are differences between UK cars and US cars.. one of the main ones being the...
Hi all, I do have a Mazda but for my sins I also have to maintain a recently acquired Ford Ka for my wife. Do any members know of a good site thatI could visit...
John, Â Thanks for getting back to me, I will check out the sites that you have sent me. I found a few but thet did not seem to be of the same quality as this...
Hi John, Can You Help With This Question Thanks." My 1996 Xedos 6 Fan Speed Controller Is Permanently On Max.Very Cold.And The Auto Switch Does Not Work....
Hi John, Can You Help With This Question Thanks." My 1996 Xedos 6 Fan Speed Controller Is Permanently On Max.Very Cold.And The Auto Switch Does Not Work....
My guess is the blower resistor has gone.. and needs replacing.. It depends whether you have full auto climate control, or manual A/C as the resistors are...
hi my car has been revving up and down in idle position for quite some time now, iv had the car checked and mechanics told me it was the maf air flow sensor......
Hi all, After much thought, I have decided to let go of my 626 which is on a R plate. The cost of putting the car right is more than I paid for the car hence...
Here's the link on ebay if anyone interested http://cgi.ebay.co.uk/1997-MAZDA-626-GSI-SILVER-FOR-SPARES-OR-REPAIRS_W0QQitemZ250295450782 Regards Prash...
For sale, set of genuine Mazda roof bars for a 626, £15. P+P would be extra but not sure how much. If local collection would be easier.My Mazda was a 1994, I...
Hi I wanted a set of these you will get more on ebay for these roof bars as the last lot I tried for was £ 65 second hand and I would have to collect so if no...
I just sold a brand new set for an MX-6.. very similar set of bars, and very high quality. I sent them using parcelforce for £15.. and I sold the bars for...
2000 1.8 626 A few days ago engine cut out for approx 1-2 seconds while being driven in gear restarted before gear disengaged. been Ok starting and running...
... My guess (and I'm no pro at this like John is) is either fuel pump or ECU. Faultfinding 101- are the plugs wet or dry after it cuts out? Is there power to...
If I had to guess.. (and I am) I would check the relays, and the ignition switch.. I would also try to pull any fault codes that there may be stored.. It does...
So, like many before me I need new rear calipers for my '99 GSi Estate. (The handbrake won't adjust, and one is leaking slightly). I have a choice of (for 2,...
Hi Chris.. Personally, I would go for the cheapest option.. and that isn't a bad price by the way.. A recon caliper should have everything replaced other that...
Hi all, just bought a gsi at the weekend,however driver and rear passenger door on dvr side are rusting along seams on the inside. Also rear arches along the...
Hi John, and welcome to the club... To be fair, any car will rust if neglected, but in general these are not known for being rustbuckets. The underneath...
Thanks for quick reply John! Yes it looks like chassis is ok, just all the bits bolted to it are rusting!! [:)] As I said before it looks like surface rust,...
