Well, I figured it out. I finally got my new wiring harness, hooked it up and it certainly did fix the problem but, instead of the high beams dim when the low...
I changed the lube in my manual trans to Redline MT-90. A local outfit had it for $9.30 a quart, so I bought it there. Got a new set of big metric end...
Anybody got diagrams etc> for carb setting up on 1990 2.0 glx 12v The damn thing is driving me nuts, got to be the most awkward carb I've ever worked on. My...
The haynes manual has this in it.. but from memory here goes... There is one screw that adjusts the high speed idle when starting from cold.. set to about 2000...
John, Been do the library route & my local motor factor says there isn't a manual for this year/model 626 and as I'm trying to sell the car don't particularly...
Sorry I don't have the haynes manual, but it is available for the earlier versions, and the carb setup is the same.. think the cover is purple. as far as I...
Has anyone on the list got the Haynes manual they could scan the relevant pages and e-mail to me so I can attempt to get the car to run right Thanks in advance...
hi all, can anybody help with handbrake.626ge,haynes manual not detailed on this topic. i used to have 10 clicks before lever came to a stop,now i have only 5...
Hi Mike, Handbrake is adjusted with a long 10mm socket and extension. There is a small cover on the console, near the handbrake lever that you remove. inside...
... OK, this got my attention. '96 V4 here in the US. Bought it used. Don't think the belt has been changed and close to 100K mi. How can I find out if its...
Iam unaware of a V4 engine.. all the model I know of have either a V6 or an I4... the I4 will suffer from valve/piston damage. You will need to check, I think...
This noise can appear when the engine is cold or warm. A mechanic told me that I need to change the oil pump, but the car only have 68K. Do you think that's...
It's possible, but I would do an oil flush, then change the oil and filter. Only use a good oil with the correct grade (10-40), and a genuine Mazda filter. If...
hi all, i have haynes 626 manual but it is based on 626 cars in the american marketplace. this haynes is an american publication. it covers most things,but...
hi all, for the benefit of others when servicing a 626/mx6 please make a note of the following part numbers: oil filter (4cyl engine) mazda part number:...
Looks well looked after pete_e_. I only have one pic here (the mx6) but theres more here http://homepage.ntlworld.com/mx6-uk/ In the members photo section. ...
Thanks! As far as I know I'm the second owner of that car (it only had 75k miles on it when I bought it) and it was in pretty decent shape, just had to fix...
I have the same problem as "rexim1" did back in April with my 1993 626. The idling is very low unless in P or N. I've looked at the air intake photo in the...
I've decided to keep my 97' 626 and "supe" it up. It hasn't been easy finding different performance parts, interior and exterior. I was wondering if anyone...
I have the same problem as "rexim1" did back in April with my 1993 626. The idling is very low unless in P or N. I've looked at the air intake photo in the...
