You can set the sort order of messages? Just click on the link in the date column. Your preferences will be remembered, so you don't have to do it again when you return.
hi could any one send me a diagram fo the carb it s a 626 2.0 12v maual have tried to get hold of a manual but still no luck yet. it has a auto choke which...
Hi John, Recently, my 626 always got over heated high temperature. I have checked the water piping, no leakage at all. But I found that when I filled up the...
as the water heats up. it expands, and so goes into the reservoir.. when it cools, it is sucked back into the system.. 1.5 litres seems a lot though. Are you...
Hi Xavier, When it comes to the water problem in your engine John is right. When the water is hot then goes into the reservoir.... (the temperature sensor ...
DAVE
dave@...
May 15, 2003 9:33 pm
573
Hi John & Dave, Thanks for your help. I have checked the following points. 1) no water or steam out from the exhaust pipes. 2) no oil sign on the filler cap &...
The pressure cap (on top of the radiator) works like a valve, excess pressure forces the water into the reservoir bottle... if it's faulty, this may cause the...
Hi John/Dave, I have changed the filler cap, pressure cap & the cooling system thermostat, its doesn't helps. As soon I found that there is some bubble...
You can get away with just changing the gasket... although it would be better to change the timing belt as well.. Other things to consider while the heads are...
Hello. let me introduce myself first.My name is Andy,this is my first mazda.A 626 gxi 1998.been trying to find some trick bits for it but havnt been very...
Hi Xavier, I would still get the engine pressure tested... it is more likely to be only one head gasket.... which one??? pressure testing will tell you and...
hi john and gang. please can someone tell me oil capacity in litres/pints for 4 cyl engines with filter change. if you are there john (compyshop), please...
Hello John, My name is Drago and you helped me a few months ago. (probably you don't remember :-)) I'm sending my questions to two e-mail addresses, because I...
Hello all; This is the first in a series of questions. I have a 93' 626 with the V6, this is a high milage car (this is by far the best car I have ever owned)....
Next question: 93' 626 with the V6, I have no idea how long the timing belt has been on this engine. Am also planning on replacing all pullys and need to...
Transmission oil should be changed at least every two years or 24.000 miles on Automatics... This is not stated in the manual, but personally, I would do this...
Hi David, As it was idling fine before you changed the filter... thats the clue.. You have obviously disturbed a pipe somewhere, and you have an air leak... ...
Timing belt and water pump are replaced in the car... This is a long job, and unless you know what you are doing, leave it to a good mechanic.. If you are...
I did some checking (back tracking my steps and retracing the work I did). I found it is the mass air flow sensor. If it is unplugged, it idles great but no...
It is not possible to bypass the MAF... it appears yours is catching somewhere, perhaps the filter is stopping it from closing fully. (or something else...
Hi, I have a small question. A friend of mine owns a '88 626 GD 2.0i- 16V. It has a catalyser and was originally sold in Switzerland. According to all...
hello all started my car this morning and it made a rattling noise like a diesel then stopped.towed it to garage to find out the timing belt has broken.car...
... 2.0i- ... only ... probably ... what ... Hi, It looks just like a 1988 148HP 2.0i 16v GTi with cat i once had. As far as i remember the 115/117HP 2.0i's...
... diesel then stopped.towed it to garage to find out the timing belt has broken.car has only done 34000 miles.is this a problem with 626 1998.anybody know...
