You can set the sort order of messages? Just click on the link in the date column. Your preferences will be remembered, so you don't have to do it again when you return.
Course you can...inter partner/marriage competitions have been the highlight in previous years, they far outweigh the main competition! Moriarty... ... -- ...
Notforgetting the 1.6 IS indeed powerful for my liking. Not as sluggish as reviews mentioned. But then of course, the 1.9 JTD has more pulling power! Lawrence...
Hi! Last weekend i talk about these mirrors with some friends of mine. I told them, that there's no possibility to get them in germany. And there's no way to...
I was charged last month for cam belt replacement by a non fiat dealer £100 for the fitting £25 for the belt plus VAT. It was a Petrol Multipla Regards Ed ...
If it's a house door bell causing the problem its usually easy to fix - open up the bell push part and you'll find either a small rotary with a pointer to...
i had the petrol 1 as a replacement for my old jtd multi 6 months later traded it in for an other jtd didnt like the petrol engine 1 bit jim [Non-text portions...
Push it harder? If its an inertia switch does it come out after a shunt or bump? Hence perhaps it needs a shunt or bump to go back in!??! I am only guessing...
Nick. I have had the switch apart and inpsected the inside. It looks like it has two positions (tripped and untripped) I am unable to get the switch to latch...
Should click back in and stay in. The only way it should release itself and cut the fuel pump in the tank is by the car hitting something quite hard. I think...
The switch has to be closed to allow the pump to run. If you unplug the switch then the switch is open and the fuel pump doesnt run. You need to short out pins...
I took out the rear seats for the first time at the weekend (long Mayday one here in Hungary). They came out a treat, but putting them back was another...
Hi The most common problem posted wrt seat removal and replacement is related to the headrests being in place. It is possible to remove the seats with the...
Dan, there is no doubt that your switch is u/s. Yes it should click into place and lock and once set, there is no further movement in the button. I strongly...
Dan, there is no doubt that your switch is u/s. Yes it should click into place and lock and once set, there is no further movement in the button. I strongly...
You can test the rpm sensor without getting under the car. The engine management computer is in the front left footwell, and if you disconnect the correct plug...
Hi cmoggy, I did do photos when you were asking a while back, but perhaps you haven't seen them? I did two with labels pointing to the rpm sensor. Jonathan ...
Hi Is there a poster anywhere with all the details and contact details that we can print off and hand to other Multi drivers or leave under their wipers? Seem...
Hi Andy , Seem to think something is a miss somewhere . The seats in our bug are dead easy to take out and put back in . I have always removed the head...
Thanks for the replies so far :-) The headrests were removed. I took them out straight away when I got the car, as my little ones are little enough to not need...
Hiya , I was going to suggest some oily fluid like WD 40 or something . Perhaps as I remove my seats quite often they haven't seized up like yours may have ....
I first noticed it at work - Canary Wharf. I thought stray signals was possible as due to the construction the mobile phone signals strenghts vary. I wasn't...
Hi all , Have owned my petrol bug since 2001 and have found the performance , economy etc fine , bearing in mind we only do a lowish yearly mileage . I would...
Hi Scott, you can print out my info poster from the files section of the forum or print one out from oddbods web site. Thanks in advance for passing on the ubb...
Hi David You have the right man! I started the 'ball' rolling when i realised that there would be no ubb this year. i made contact with billing and sorted out...
Hi David You have the right man! I started the 'ball' rolling when i realised that there would be no ubb this year. i made contact with billing and sorted out...
