--- In pip_squeak_and_wilfred@..., "Peter Etherington"
<peter.etherington@...> wrote:
>
> Thanks Robert, but it`s the arm on the rear wheel i`m after. Many thanks Pete
> ----- Original Message -----
> From: Robert Hummerstone
> To: pip_squeak_and_wilfred@...
> Sent: Sunday, April 05, 2009 11:34 AM
> Subject: RE: [pip_squeak_and_wilfred] rear brake on Powerbike 56
>
>
> Hi I Have uploaded a couple of scans to the powerbike album one from the
NACC library not shore they will help but worth a look
>
>
>
> Robert
>
>
>
>
> ------------------------------------------------------------------------------
>
> From: pip_squeak_and_wilfred@...
[mailto:pip_squeak_and_wilfred@...] On Behalf Of ether823
> Sent: 04 April 2009 18:16
> To: pip_squeak_and_wilfred@...
> Subject: [pip_squeak_and_wilfred] rear brake on Powerbike 56
>
>
>
> I wonder if anyone can help me. On my powerbike 56, to operate the rear
brake you pedal backwards, and in doing so today the arm of the brake has come
off. For the life of me I cant find how it was fastened on. There is a slot on
the arm which mates up to the male piece on the hub but there is no way of
keeping the arm on the hub. The only way I can think of keeping the arm on the
hub would be to drill and tap the slot then put a bolt in to secure the arm. Any
help would be grateful. Pete.
>
>
>
>
>
>
>
> ------------------------------------------------------------------------------
>
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.0.238 / Virus Database: 270.11.41/2041 - Release Date: 04/04/09
16:53:00
>
I`ve sorted out the problem. The arm was swaged on. I`ve put a washer on and
tack welded. Pete