Hello, I´m now using PMSDR since some days with a 48khz sampling card and enjoying the possibilities of this fine radio. Major question I have in the moment...
Upgraded to the new firmware v2.2.3, installed the new v3.4rev0 DLL files for use with PowerSDR-IQ, but can't get any signals. Previously, my version of...
A new free release of WRplus, 1.06 is available for download from www.wrplus.altervista.org <http://www.wrplus.altervista.org/> . The new application that...
2 weeks ago I did the mod for PMSDR. What an improvement that, too bad I have no screenshots of before and after. But for me the difference was clearly...
HI, I have my E-MU 0204 one week and have had problems with the sound! When I change for 24bit/192kHz asio e-mu drivers I listen a crack sounds. 16bit/192kHz I...
Hi All I'm a new, and very happy, owner of the PMSDR and to date I've been using a Soundblaster Audigy 2 NX USB soundcard. A friend of mine has loaned me his...
Hello Martin, I have a PMSDR radio and I'm very happy ... with new firmware and everything is working 100%, you done a very good job !!! But there is a small...
Hi all, I am happy to play around with my PMSDR. I use it now as pan adapter connected to the IF of my K3. I run the latest software and use HDSDR. I had to...
I want to once again buy a good soundcard. Right now I use an E-mu0202, but I am not satisfied with this sound card. I've tried several soundblaster cards. Now...
Hallo Martin, I've installed the new DLL 3.5 on my DELL INSPIRON with WINDOWS 7 but I'm not able to change the band both using the quick band selection as well...
Hello all, I downloaded recently the latest update from HDSDR software and I noticed a strange action.Each time I click on a CW signal in the lower waterfall...
I can´t install new firmware. After reset( green, red, green) the usbupdate.exe don,t recogneize pmsdr board. No Software recogneize it. What has happened? ...
Hello to everybody! I'm buying a Yaesu FT 920 used. I would like to use my PMSDR with it as panadapter. I know it has an IF at 68.985 Mhz. Is possible to send...
Hello I also use the SDR-Radio SDR-+ PM directly to decode digital modes (PSK31-RTTY-CW etc..), how to set up HRD + DM780 for decode SSTV (use "vspMgr or" VAC...
Hello! While scanning the 6m Band with PMSDR I noticed some AM Broadcast-like sounding signals, that are definitely not received on 50 Mhz. They are different...
I don't want to have to reach behind my PC or the PMSDR on the shelf to power the receiver on and off by pulling out the USB cable. What I want is a power...
here are a couple of videos once again showing the pmsdr in action ( just passing time untill vhf tv dx season starts ) using either wrplus or powersdr iq ...
Hi all, I would like to understand how it's possible to increase the disturb rejection and avoid ground loops. I would like to understand what kind of tricks...
I am using the most recent version of HDSDR which works great with my PMSDR! However, a problem arises after having played back a recorded file, and switcjing...
Hi all, finally I have my EMU 0204 on a new quad core computer with Windows 7. I try to use the ASIO driver and I listen what comes out from PMSDR (FW: 2.2.3,...
Hi .. I upgraded to FW V2.2.3 ok I nstalled Lib usbwin32 USB driver in my Win XP ok. I have copied the DLL (DLL 3.4 rev=0) files to my working Winrad dir . ...
Hello group, Today I finished assembling my new PMSDR. I wanted to use it on a mac with the software DSP-RADIO. Just connected my hardware and configured the...
All Some work with PM-SDR ROS to receive digital mode? I've tried and are also able to decode a pair of QSOs, but The label tells me "USB ERROR" is always red...
A new free release of WRplus, 1.05 is available for download from www.wrplus.altervista.org <http://www.wrplus.altervista.org/> . As you probably already...
Hello guys, Anyone know how I can stop the PMSDR local oscillator coming through when I'm running HDSR in stand alone mode ? It's obviously a massive signal...
Hi all, I use a PMSDR (as RX) with FT-2000 (as TX) with HDSDR. It would be possible to "mute" a PMSDR (check box in the new DLL is present) automatically when...
Hello everyone, I use my pmsdr with its downconvertor in combination with my IC746. I have two problems with this combination: First: I have great problems in...
