You can set the sort order of messages? Just click on the link in the date column. Your preferences will be remembered, so you don't have to do it again when you return.
Hello all, I am running the PM-SDR with the LCD display option with the HDSDR software. The display on the PMSDR will often freeze up and stop working any...
1430
Michiel
michiel_boven
Jun 4, 2012 10:41 am
... Hi, Doe you have in the extio the "show frequency on lcd " checked ?...
1431
Dave
n1ohn
Jun 4, 2012 11:49 am
Yes it will work for a short time then freeze Dave...
1432
Martin Pernter
iw3aut
Jun 4, 2012 11:57 am
And what do you do to start working again the LCD? Martin ... And what do you do to start working again the LCD? Martin Da: Dave <n1ohn@...> A:...
1433
Dave
n1ohn
Jun 4, 2012 12:32 pm
I have to unplug the sdr and restart the software Dave ... I have to unplug the sdr and restart the software Dave On Jun 4, 2012, at 7:57 AM, Martin Pernter <...
1434
Martin Pernter
iw3aut
Jun 4, 2012 12:41 pm
ok, what a firmware version do you have on your PMSDR? Martin ... ok, what a firmware version do you have on your PMSDR? Martin Da: Dave <n1ohn@...> A:...
1435
Dave
n1ohn
Jun 4, 2012 1:05 pm
V2.3.0 with the new and old DLL also tried the 2.? Firmware and same thing Dave ... V2.3.0 with the new and old DLL also tried the 2.? Firmware and same thing...
1436
Michiel
michiel_boven
Jun 5, 2012 5:31 pm
... Do you use a usb hub? If so , remove it. Michiel...
1437
Dave
n1ohn
Jun 5, 2012 5:53 pm
Hi Michiel, No I don't have a USB hub in line Dave...
1438
Martin Pernter
iw3aut
Jun 5, 2012 6:50 pm
Hi, the red STA-LED on the back panel should blink fast if you change ONLY the TUNE-frequency. Does blink this led also if the LCD freeze? Martin ... Hi, the...
1439
Dave
n1ohn
Jun 5, 2012 7:29 pm
No the led stops blinking however the unit will still change frequencies Dave ... No the led stops blinking however the unit will still change frequencies Dave...
1440
Martin Pernter
iw3aut
Jun 5, 2012 7:48 pm
In this case, does blink the red STA-led if the LCD freeze and you change the LO-frequency? Martin ... In this case, does blink the red STA-led if the LCD...
1441
Dave
n1ohn
Jun 5, 2012 7:51 pm
When the LCD is frozen the led will not blink any more but I can still change frequency and the unit will work fine with the exception of the LCD being frozen...
1442
Dave
n1ohn
Jun 5, 2012 7:57 pm
Also when the LCD is working the led is blinking Dave ... Also when the LCD is working the led is blinking Dave On Jun 5, 2012, at 3:51 PM, Dave <...
1443
dc2jr
Jun 6, 2012 8:59 am
Hello, in the description of the DLL 3.8 a new firmware 2.4 is mentioned but I can't find it here n the files sections or on the pmsdr homepage Klaus...
1444
Martin Pernter
iw3aut
Jun 6, 2012 9:02 am
Hi, DLL 3.8 is already available, but the firmware V2.4 coming soon. Martin ... Hi, DLL 3.8 is already available, but the firmware V2.4 coming soon. Martin Da:...
1445
maddox_sdr
Jun 11, 2012 3:45 pm
New to the group - I just received and built PMSDR 2.20 kit w/display. I am trying to find settings to get it to work with a SB X-FI pro USB sound "card." I...
1446
Martin Pernter
iw3aut
Jun 12, 2012 7:06 am
Hi, the PMSDR can´t be tuned below 100kHz. If you use the SB X-FI pro USB with a PMSDR, then you can set the Line-IN level of your SB X-FI pro USB aprox. at...
1447
Dave
n1ohn
Jun 12, 2012 9:43 am
??? Dave ... ??? Dave On Jun 5, 2012, at 3:56 PM, Dave < n1ohn@... > wrote: Also when the LCD is working the led is blinking Dave On Jun 5, 2012, at 3:51...
1448
Martin Pernter
iw3aut
Jun 12, 2012 12:21 pm
Dave, you wrote that the unit work fine except the LCD. Very strage behavior, because no blinking STA-LED mean no USB communication. Please test the PMSDR on a...
1449
Martin Pernter
iw3aut
Jun 13, 2012 8:29 pm
Hi Group, here some updated filter response values, and images about the final PCB of Filterboard: http://www.iw3aut.altervista.org/pmsdr_filterboard.htm 73 ...
1450
pa0gsm
Jun 19, 2012 11:48 am
Hello all, I have a problem with the vhf/switchboard option. The vhf died by a technical failure of an external coax relay. The coaxial relay had a shortcut...
1451
Martin Pernter
iw3aut
Jun 19, 2012 11:56 am
Hi Gerard, please check also the UHF (70cm) band. But so far i can suppose, it should be defective the input LNA IC6. Martin ... Hi Gerard, please check also...
1452
dc2jr
Jun 19, 2012 12:31 pm
Hello, yesterday I updated the Firmware from 2.3 to 2.4. The following issue I realized: If you switch with Quick Tune from one band to the other, in HDSDR...
1453
pa0gsm
Jun 21, 2012 7:50 pm
Martin, TNX for your reply en suggestion . 70CM also doesn’t work. Of cause it is possible and most logical that something in the input circuit died when the...
1454
Michiel
michiel_boven
Jun 28, 2012 12:20 pm
I have the filter board yesterday ordered from the dealer. So I expect him next week to get inside. What I just do not understand how the notch filter can...
1455
Martin Pernter
iw3aut
Jun 28, 2012 1:18 pm
Hi, the notch filter (Filter 2) will be activated automatically by the ExtIO or by the firmware (SI570 USB mode). Due the high off-band attenuation of Filter...
1456
Michiel
michiel_boven
Jun 28, 2012 3:16 pm
Ok Martin, thats clear. Cant wait to play whit it. Thanks...
1457
Bas
brijniersce
Jun 28, 2012 3:30 pm
Hello, I hope this question is OK for this list. I've recently the PM-SDR project and are very impressed. I think ti would be a great addition to my also...
1458
Martin Pernter
iw3aut
Jun 28, 2012 3:37 pm
Hi Bas, you can get the PMSDR from PARMA BV. It's the exclusive dealer for the NL: http://www.rfsystem.it/shop/dealers.php Martin ... Hi Bas, you can get the...
