Yes, you have to put all files in the same working directory of HDSDR. Martin ... Yes, you have to put all files in the same working directory of HDSDR. Martin...
1462
Michiel
michiel_boven
Jul 5, 2012 8:31 am
I have the filter board now for 3 days, and i am happy with it. It was good packed, and complete. Normal i use a Lowe pr-150 preselector , but now not more. ...
1463
Martin Pernter
iw3aut
Jul 5, 2012 9:48 am
Hi Michiel, many thanks for your feedback! Now enjoy lower bands with your PMSDR....;) Martin ... Hi Michiel, many thanks for your feedback! Now enjoy lower...
1464
Dave
n1ohn
Jul 6, 2012 10:06 am
My problem is this .... If I tune my sdr to say 7.222 USB in HDSDR I receive fine however the actual conversation is on 7.180 LSB. What did I do wrong? Thanks...
1465
Nigel (Nidge) Smith
sputniksamuk
Jul 6, 2012 10:55 am
You haven't done anything wrong, you just have your I and Q reversed. In HDSDR go into the options menu, and select "Swap I and Q " This should correct the...
1466
Dave
n1ohn
Jul 6, 2012 12:55 pm
Ok I will try that when I get home thanks!! Dave...
1467
Martin Pernter
iw3aut
Jul 6, 2012 2:27 pm
Hi, you have maybe to swap the I/Q channels: Please refer to Page 35 on the user manual http://www.rfsystem.it/pmsdr/files/PMSDR-Manual-v1.0.pdf Martin ... Hi,...
1468
David
n1ohn
Jul 6, 2012 9:16 pm
Thanks for the help all, I swaped the I/Q it worked on 7mhz then tuned to 18.208 LSB and was receiving the Conversation that was on 18.165 USB did the swap...
1469
Nigel (Nidge) Smith
sputniksamuk
Jul 6, 2012 10:48 pm
Hi David I think the problem you are now experiencing is an unwanted image. You will need to adjust your I and Q Skew Calibration, again found under the...
1470
Dave
n1ohn
Jul 6, 2012 11:02 pm
Ok I will play with that Saturday and get back to you all ... Thanks a lot !! Dave ... Ok I will play with that Saturday and get back to you all ... Thanks a...
1471
Dave
n1ohn
Jul 7, 2012 5:45 pm
I have played with the I/Q sliders and unfortunately it did nothing at all. Still off freq and mode. I agree that it looks like a imaging problem. Dave ... I...
1472
Dave
n1ohn
Jul 7, 2012 7:37 pm
Update .... Currently I'm using the pmsdr on the rx port of my ft200. If I put the sdr on it's own antenna the sdr will receive on the correct Frequency and...
1473
Dave
n1ohn
Jul 7, 2012 7:49 pm
Never mind last email it still all messed up even on it's own antenna. Dave ... Never mind last email it still all messed up even on it's own antenna. Dave On...
1474
Dave
n1ohn
Jul 8, 2012 12:54 pm
Is there anything I can do with this? The I/Q sliders did nothing .... Thanks all Dave ... Is there anything I can do with this? The I/Q sliders did nothing...
1475
Dave
n1ohn
Jul 8, 2012 2:19 pm
Ok all I think I found my error I did not have the I/Q selected in the RX section I was running under left Chanel only. Now I have a decimate double on side I...
1476
Dave
n1ohn
Jul 8, 2012 3:00 pm
Today the unit locked up again still have no idea why this is locking up. Dave ... Today the unit locked up again still have no idea why this is locking up....
1477
David
n1ohn
Jul 9, 2012 2:20 am
Any help with this Martin? this is a new unit :( Thanks Dave...
1478
Mark Hoffman
k2axx
Jul 9, 2012 3:12 am
Dave, When you assembled the kit, are you certain you made the proper connections to the ribbon cable (i.e. no cold solder joints, no frayed wires, etc)? If...
1479
Dave
n1ohn
Jul 9, 2012 9:43 am
Hi Mark, Well I noticed now that when the unit stops working the USB light stops flashing and the software will work however originally I thought the unit was...
1480
Martin Pernter
iw3aut
Jul 9, 2012 3:00 pm
Hi Dave, i'm on holiday with only a limited access to internet. It's sounds like a microcontroller hangup issue. This can be caused by a unstable +5V supply. ...
1481
Dave
n1ohn
Jul 9, 2012 3:16 pm
Ok Martin I will send it tonight I'm at work now. Yes in fact I just assembled a new computer that it's running on. Dave ... Ok Martin I will send it tonight...
1482
David
n1ohn
Jul 9, 2012 10:59 pm
After the unit freeze the HDSDR software will not see the SDR unit i have to pull out the usb cable for it to work again..... Debug log after todays lock up ...
1483
Martin Pernter
iw3aut
Jul 10, 2012 1:51 pm
Hi Dave, i can't see error messages. Very suspicious..... There should be several I/O error messages if a PMSDR locks up. Please try to reapeat some times the...
1484
Dave
n1ohn
Jul 10, 2012 2:13 pm
Hi, That's the thing the unit stops working however the software don't recognize that the sdr stopped working. That's why originally I thought that the sdr...
1485
Martin Pernter
iw3aut
Jul 10, 2012 5:43 pm
Hi Dave, A lock up of the PMSDR without several I/O error messages is nearly unpossible... Please try to reapeat some times the STOP-START sequence on HDSDR...
1486
Bruce Toal
maddox_sdr
Jul 10, 2012 6:03 pm
Dave - one thing I have noticed is that some USB devices do not run well attached to a USB3.0/USB2.0 port of new machines - you may try attaching it to a...
1487
Bas
brijniersce
Jul 11, 2012 12:28 pm
Hi, Just got my new PM-SDR in my hands. I don't have access to a CD driver, so can't load the drivers from CD. I was expecting a pop-up for a USB driver (that...
1488
Martin Pernter
iw3aut
Jul 11, 2012 12:31 pm
Hi Bas, you can copy the drivers from your CD to a USB-Stick or get it directly from here: http://www.rfsystem.it/pmsdr/files/PMSDR-LibUSB.zip Martin ... Hi...
1489
Bas
brijniersce
Jul 11, 2012 1:37 pm
Hi Martin, Great! Working now, now to get it to receive. Tx Bas...
1490
Dave
n1ohn
Jul 12, 2012 9:53 am
Hello all, Well I might have solved the problem. I think Bruce hit the nail on the head with this. All the computers I have been trying are all less then a...
