What sound card should I buy for my PMSDR? I see many of those Creative Sound Blaster X-Fi cards. The cheapest here costs 49 Euro, but is it a good buy? ...
Quality of sound card is for sure very important with SDR's which use the audio input for sending data to the PC. Good sound cards can be bought for less than...
Hi Daniele, Thanks for your answer. The M-Audio Audiophile 2496 PCI is indeed enough offered on Ebay for under 100 Euros. The EMU 0202 I find for 109 euros on...
Michiel, i can also suggest to use the EMU0202. This soundcard isn't so expensive and work very well with a QSD-SDR receiver like the PMSDR. 73 de Martin ...
Hi Martin, Thanks for your reply too. I'm going to find information on the web about the EMU 0202. I read a lot positive about this device. What I just could...
hi in my opinion the better the soundcard the better the pmsdr. when i first got the pmsdr i tried it with onboard realtek 48 khz and performance was not so...
Yes, and the channel skew calibration is also important, for all sound cards. The "mirrors" (the images of the signals) can be greatly reduced with a accurate...
Hi David , I learned yesterday morning EMU0202 ordered. I see myself very much difference in different sound cards. I noticed that you are good to watch the...
Hi All, I use my program PMSDR Powersdr-iq version 1.12.20. Is this the only version that works with the PMSDR? When I look at the layouts look from the last...
i am working on the hotkey script so it will change the frequency as well instead of leaving it on the desired frequency that you want to record so you can...
Hi group, I have just downloaded the firmware version 2.1.7 (previos version in my PM-SDR was 2.1.6). The download process went smoothly, but unfortunately now...
I think I have solved the issue by swapping I and Q channels :-) Regards Daniele ________________________________ From: Daniele <danieletincani@...> To:...
Dear David, the downconverter is already in production and will available after the 18th July. I will bring the demo unit of the downconverter to the...
Today my EMU0202 received through the mail (finally). After a few hours to play it, it occurs to me actually a bit disappointing. Or I have it wrong. I just...
Dear Michel, there are two inputs to use on the EMU-0202: R-Hi-Z and L-Line. Do not use the L-Mic Input (3,5mm jack)!! No stereo inputs are present on this...
Hello Martin , Thanks for your reply. I have the same emu connected as your beautiful pictures. But I understand one thing. -hi-Z/line Why should the pot to 0?...
Hi Martin , The ASIO driver I have now not count checked. I see that I r-hi-z/Line at the equivalent level to set the levels to suppress. They are almost gone....
Michel, the gain settings are the same for ASIO or WMME. please set careful the gain setting knobs on your EMU0202 (see also Winrad's "Show Options"-> "Channel...
Martin , I will play olso with te skew Calibration . I have solder 6.3 jack plug for the Left input . That works great , i think i have a mistake that i...
Alberto's advices will help you http://www.mail-archive.com/soft_radio@yahoogroups.com/msg03621.html http://www.sdradio.eu/images/emu5.jpg Francesco...
... ..on Windows sure.. Are you aware of Windows SoDiRa program ? (http://www.dsp4swls.de/sodira/sodiraeng.html) It allows you to decode DRM stations and to ...
Hi Francesco , Thanks again . :-) I will look at SoDiRa . The trick whit the 3e harmonic i do not tested yet. The weekend i have more time voor that. Nice...
Hi everybody, I have made a revisited build of winrad, based on the opensource version, with some graphic improvement and a station database; it's called...
very good andrea i had a quick try and its working well with the pmsdr i will have a longer try later. i would like to see a provision for WFM mode in winrad...
