pontiac42to48messageboard : Messages : 660-689 of 7234

Messages: Simplify \| Expand (Group by Topic)		Author	Sort by Date

660	For anyone interested in the continuing saga of the Blue Dress! I watched the movie again last night and also taped it. After reviewing the tape in pause and...	dld117	Mar 1, 2003 6:51 pm
661	No matter how I try to align the hood, as soon as I get it in the correct alignment It chips and scrapes the cowl edge when it is opened. The car had a hard...	humphreylees	Mar 2, 2003 12:18 pm
662	My son was watching "My Classic Car" on the Speed channel and on the closing credits the very last car you see is a nice '48 convertible! I imagine that it...	Dave dcpyatt	Mar 2, 2003 4:09 pm
663	I've never replaced the hinges, but mine's chronically misaligned just slightly. I think mine would benefit from new springs. Anyone know a good source for new...	Glenn glennstreaml...	Mar 3, 2003 2:59 am
664	I noticed springs at www.chevsofthe40s.com dont know if they will fit. I decided to knock out the pins and make new ones. There was a slight clearance on the...	humphreylees	Mar 3, 2003 1:48 pm
665	Glenn, Arthur Ruscher 941-745-2031...	rshoestock	Mar 3, 2003 2:00 pm
666	I am having that problem with my '42. I removed the springs(witch created more chips)and set the hood where it looks correct. As soon as I tighten all the...	Raul Shimizu rockerpanel2000	Mar 3, 2003 4:58 pm
667	You need a tool to keep the springs expanded or better still, two. That way you do not need to take them off the springs when they are off the car. According...	humphreylees	Mar 3, 2003 5:16 pm
668	I have a service manula that shows the tool. I guess I'll have to put on my "project brain" and make a set of the tool. I usually takes four guys to do a hood...	Raul Shimizu rockerpanel2000	Mar 3, 2003 5:37 pm
669	Hey, Raul Who are you having replate the hood center strip?...	kevinc@... stearman_325	Mar 3, 2003 6:18 pm
670	ASTRO PLATING. They are in the city of Van Nuys. They are one of those places around here that have pictures of celebritys all over the walls. He is going to...	Raul Shimizu rockerpanel2000	Mar 3, 2003 6:40 pm
671	Me, too. I need to have mine done as well....	kevinc@... stearman_325	Mar 3, 2003 6:55 pm
672	I'll let you know how it comes out. ... From: kevinc@... [mailto:kevinc@...] Sent: Monday, March 03, 2003 10:59 AM To:...	Raul Shimizu rockerpanel2000	Mar 3, 2003 7:08 pm
673	I just finished the linkages. They were rather sloppy. Nice and tight now. I can now set the hood closer than I could before without the edge of the cowl...	humphreylees	Mar 3, 2003 8:37 pm
674	If you find out, please let me know. Leroy ike_ise@... ________________________________________________________________ Sign Up for Juno Platinum...	ike_ise@...	Mar 3, 2003 9:19 pm
675	Give me a holler if you need the chrome strip. I have a couple from '47's. Leroy ike_ise@... ...	ike_ise@...	Mar 3, 2003 9:19 pm
676	I had the same problem. I couldn't get it right and some nut came along when I wasn't around and slammed the hood and now it has a kink in it. So it goes....	ike_ise@...	Mar 3, 2003 9:19 pm
677	I can send you some used ones off a '47. Leroy Iseminger ike_ise@... ________________________________________________________________ Sign Up for Juno...	ike_ise@...	Mar 3, 2003 9:19 pm
678	Humphrey, I have that same problem. The passenger side is nice all around. The drivers side,the hood,fender and fender cap all need work. ... From:...	Raul Shimizu rockerpanel2000	Mar 3, 2003 9:53 pm
679	Thanks Leroy, It's just a waitin game now. I hope it comes out ok. ... From: ike_ise@... [mailto:ike_ise@...] Sent: Monday, March 03, 2003 12:50 PM ...	Raul Shimizu rockerpanel2000	Mar 3, 2003 10:24 pm
680	While on the subject of hoods ,I have made a hood opening modification to my car you may be interested in .In the bottom of the plate that houses the cable and...	Steve Slater ml093	Mar 4, 2003 9:34 pm
681	The messages I sent today all came back to me so I hope I can get hooked up. Leroy ________________________________________________________________ Sign Up...	ike_ise@...	Mar 4, 2003 10:49 pm
682	What do I do without that slit? My hood cable broke off and the hood is shut? Leroy ________________________________________________________________ Sign Up...	ike_ise@...	Mar 4, 2003 11:00 pm
683	I would recommend taking off the hood hinge assembly and at the least, hammer the rivets it they have worked loose. I did not see much lateral wear but the...	humphreylees	Mar 5, 2003 10:06 am
684	I've gotten my hood open several times when I had disconnected the cable and accidently shut it. All you need is a thin flathead screwdriver or a thin, stiff...	Glenn glennstreaml...	Mar 5, 2003 6:42 pm
685	I have a nos rockerpanel moulding for sale $30. #2500 series. It is the lower right front fender.(curbside)US. I bought it on e bay. Thinking it was for a...	rockerpanel2000	Mar 7, 2003 5:49 pm
686	Can you send me a picture? Does it have an Indian head emblem? Leroy ike_ise@... ________________________________________________________________ Sign...	ike_ise@...	Mar 8, 2003 2:52 am
687	I recieved this email last week: I recall that the USMA (West Point) had a Pontiac Woody as a utility vehicle. It supposedly was purchased new and was still in...	Don Hinsberger donaldhinsbe...	Mar 8, 2003 7:13 pm
688	Perhaps the date is just a typo. Seems rather a long time to keep a 48 woodie. (especially at a posh military academy) ... From: Don Hinsberger To:...	Humphrey humphreylees	Mar 8, 2003 7:25 pm
689	I am a novice at this computer but the other day when fooling around with it I came up with an ad from a fellow out east who had a '46 low mileage Pontiac for...	ike_ise@...	Mar 8, 2003 11:41 pm

Yahoo! Groups Tips

Did you know...

Messages