You can set the sort order of messages? Just click on the link in the date column. Your preferences will be remembered, so you don't have to do it again when you return.
What color were the original spark plug wires for our cars? I need a new set, and I was looking at the ones at Narragansett Reproductions. Mine are red with...
I got some yellow and black from Kanter. Very expensive including the cost of shipping. Plus, the rubber insulators were rubbish that I threw in the bin. I...
Looking for the Intake and Exhaust Manifold Gasket for my 1942 Pontiac, Straight Eight. Kanter wants to sell the whole set, but I only need the one. Thanks,...
Search for as early as 1933 up to 55 as they are the same. The original metal backed ones last longer than the Kanter ones. ... From: sprad666@... To:...
I had the same problem with Kanter. I needed just the crankshaft pulley seal for my 50. Kanter wouldn't sell just the seal, didn't want to spend over $100 just...
Just posted some pictures of my '42 at the All GM Car Show on June 28th. Runs good now that I fixed the pistons. Still work in progress but finally getting...
I've been on this list for quite a few years and I'm wondering why the 41's are excluded? I feel like an orphan here since I have a 41. I know that not much...
Can you give us a link please? Thanks, Tim In a message dated 7/10/2009 12:49:44 P.M. Eastern Daylight Time, rockerpanel2000@... writes: Just posted...
Hi Hugo, I started this group about eight years ago as the excellent site run by Don Hinsburger that we were using broke. Anyone with a forties Pontiac can...
Thanks Tim In a message dated 7/10/2009 4:49:06 A.M. Eastern Daylight Time, hlees@... writes: Search for as early as 1933 up to 55 as they are the same....
I am also an "outsider" with my 40. Any chance would be appreciated; maybe associated with the engine change in the late 30's. By the way if anyone has a...
Hello, Hugo! I have a '41 model 2609, so don't feel alone. I've gotten a lot of help over the years from this group. So just keep hanging around. Glenn...
We made it back from Dayton, Ohio on Sunday with only one flat tire just south of Concinnati. Boy am I glad that tire didn't go flat on the bridge over the...
Hey Tim, How are you? This show was put on by the Los Angeles chapter of the Buick Car Club. Just access the Buick Car Club of America website and look into...
Thanks Kevin, Still working on it though. Great show good turn out. A lot of old timers really liked it. Even got an offer. But I did not want to ask. I might...
Hi Raul. I'm doing fine with my 42. Couldn't find the pictures on the web site though, just for last year's show. Best wishes, Tim. In a message dated...
Yes I know they have not updated their site with this years photos. I'll check from time to time and let you know. I have to start working on getting my fender...
... Sorry to hear about the fire. I have a 48 I was wanting to fix up but couldn't get a title for it. Bought it up near Seattle. It just sits on the side of...
I need the 4 bolts that hold the armrests on the door panels and one of the stainless steel armrest mouldings. It's a '42 2dr if that makes any difference. And...
Hey Gonzalo is there any way to get pictures of what the motor mounts look like after they are mounted? Any step by step help would be great....thnx alot Danny...
YOU WILL NEED TO CUT THE MOUNTS TO THE FRAME IF USING THIS STYLE OF MOUNT SET UP. I ALSO USED SOME ANGLE IRON AND WELDED THE MOUNTS TO THIS ANGLE IRON THEN THE...
HERE ARE A COUPLE OF PICS, MIGHT NOT WIN AN AWARD FOR LOOKS BUT DONE WELL AND VERY STRONG. I ALSO MADE A STRAIGHT SUPPORT FOR MY TRANS. I USED THE OUTER FRAME...
As I recall, there is two basic kinds of the window felt. There is the U-shaped channel that is lined with felt that goes on the sides and upper portion of the...
