Paul,
My Sprog lands up by default on COM 4 and I have played around with
the Port setting - Flow control - tried all 3 available settings.
Your suggestion runs alongside a couple of others that I'm
underpowered.
I'm now waiting for a 1.25Amp RPS to arrive to try that.
Will update the group on my return from skiing in 10 days time.
Thanks to everybody trying to help me!
Regards
David

--- In sprog-dcc@..., "Phil Dunlop"
<phil_dunlop2002@...> wrote:
>
> Hi, more butting in,,,,,
>
> I'm pretty sure I'm running pure default, my sprog auto lands on
COM
> 9 as shown in device manager, (9600,8,none,1,none) the 2 "none"s
line
> up with parity and flow control. I've not had any problems clear
> back to install. Running XP sp2 all patches. JRMI 1.75. Java
> 1.5.0_11.
>
> Just looking at your set up, when I first got my DP I had it
running
> on 500ma 12v power supply and it was getting occaisional time out
> errors with Soundtraxx decoders, I bumped up to a 1 amp PS and
> problems went away. You might be underpowered.
>
> Just a thought.
>
> cheers
> phil
>
> --- In sprog-dcc@..., "David Butler" <dandgbathome@>
> wrote:
> >
> > OK, Andrew, I've done a re-install - According to the JMRI
> debugging
> > section everything is OK. However I'm getting timeout errors all
> the
> > time. I'm connected to a dc supply of 13.5VDC @325mA.
> > I've tried setting the Com Port timeout settings as high as they
> can
> > go. What Baud rate should it be set at?
> > Flow Control is set to Hardware from a choice x-on/x-
> > off;Hardware;none.
> > Anything else I should be looking at?
> > I'm running this on a portable laptop with a1.6gig processor and
> 1gig
> > of RAMunder XPSP2 and all the latest patches.
> > I've run out of ideas now
> > Regards
> > David--- In sprog-dcc@..., "David Butler"
> > <dandgbathome@> wrote:
> > >
> > > --- In sprog-dcc@..., "David Butler"
> <dandgbathome@>
> > > writted:
> > > I was trying mine on the 1V o/p from a Bachmann controller -
so
> I
> > may
> > > be contributing to my woes.
> > > -----------------------------------------------
> > > What I meant to write was :-
> > > I was trying mine on the 12V o/p from a Bachmann controller -
so
> I
> > may
> > > be contributing to my woes.
> > > Cheers
> > >
> >
>