Andrew,

Thanks for the tip. The bit for rolling_rode_mode was set.

Bob



---> On 04/08/2006 3:24 AM, andrew_croslanduk said the following:
> Bob,
>
> I haven't seen that problem before. What output do you get from an M
> command sent to the SPROG? I'm wondering if one of the mode bits are
> somehow stuck in rolling road mode. You could try turning the track
> power off (- command) and sending a W command to write the resulting
> mode setting back to the EEPROM. Use a terminal emulator or the
> DecoderPro send command/command monitor windows to talk directly to the
> SPROG.
>
> Andrew