Hi all, Have used Lenz Gold decoders (around £23) in past. Notice Bachmann have launched 4 function decoder with back EMF for £9. Has anybody used this new...
Cliff Lewis
cliffl.amr@...
Oct 12, 2006 11:53 am
124
Cliff, The question is really how to get DecoderPro to recognise the decoder. Any decoder can be programmed by selecting the generic NMRA decoder. This will...
Thanks, Cliff You can find AMR at www.amrinvest.co.uk Email Disclaimer: The information in this email is confidential and privileged. It is intended solely for...
Cliff Lewis
cliffl.amr@...
Oct 12, 2006 3:55 pm
126
... the ... decoders. ... and the ... Jeff, I have to say that I have never heard of LGB decoders or Massoth. I have little doubt that other members may well...
... Okay, thanks.. Now I have received my SprogII Serial, and acquired the serial cable, hooked all up, connected to program track, installed latest decoder ...
... Further update.. sourced old Sprog files and discovered No Parity, 1 stop, Hardware handshake.. no inference to baud, but I am assuming 9600.. also...
Froghall station, Churnet Valley Railway. 10:30am -4:30pm . £2.50 Adults £1.50 Child / OAP £6 Family (2+2) Traders include Sprog DCC by Andrew Crosland, C&B...
... In the DecoderPro preferences, you have to pick the COM port that the SPROG is connected to, save the preferences, and restart the program for them to take...
... Which is all fine.. I can pick any Com port, but given the fact that I cannot find a Sprog Entry in the Device Manager, how do I determine the correct...
Lets go back a bit. Step 1: Figure out which com port you are using You can just plug things together and hope you figure out which one OR you can figure out...
Dennis, the process goes like this: SPROG waits for the computer to tell it what to do. Assuming all works well, plugging in the SPROG to the serial port will ...
... I'm sorry, but you missed my point. The SPROG is _plugged_ _into_ a COM port. You should not "pick any Com port"; you should pick the one that the SPROG...
... Okay, this works fine.. ... I used Hyperterm as you noted below and found response on COM1 so I set DecoderPro to COM1 and restarted it. ... Right, I did...
Hi guys. Can you tell me if V1.4 firmware is high enough to use the sprog as a command station. I have some devices that require Ops mode programming. Once I...
Andrew, I have just been having a 'play' with the new Command Station version of jmri and there seems to be a slight anomaly in the operation of the...
Thanks to all who helped Dennis on this. I've been out of it for a couple of days trying to get a test track built for SPROGs first exhibition. Andrew...
... the ... mode ... want ... of ... Greg, Version 1.4 should be OK. I can't remember now, but don't you have an old SPROG that would be version 3.x? That...
John, Thanks for the feedback, and you are correct. I'm guessing it's just a bug in the new code I have written. Watch this space... How do you find it...
... Right, all the replies were great.. up and running is a nice feeling.. couldn't believe how much basic computer technology I had forgotten.. been decades...
Andrew Thanks for the comments. I haven't really been able to use it a great deal yet as my layout is somewhat embryonic but I have had some problems with the...
David - LGB is short for Lehmann Gross Bahn. EP Lehmann is a German manufacturer of large scale garden railways. Massoth is their chief electronics supplier....
David - LGB is short for Lehmann Gross Bahn. EP Lehmann is a German manufacturer of large scale garden railways. Massoth is their chief electronics supplier....
John, A short will cause SPROG to turn off the track power. This isn't reported (yet) to DecoderPro so the throttle power LED will still show green. Toggle the...
... of ... the ... If you are going to remove any caps then I would remove them all. On the other hand, if it isn't broken, don't fix it ;-) ... does ... Yes,...
... Unless your decoder includes the required supressors and specifically states that it does you should not remove any capacitors from a model. They are there...
... Okay, point taken [g] I will leave well enough alone for the moment. ... Right, thanks for confirmation. Did not want to inadvertently mess up an ...
... As I never expect my locos to be running in Europe, I doubt I need worry about it. [g] ... Not applicable outside of Europe, I suspect..[g] ... Dennis -- ...
Hi all, I'm running Decoder Pro - with Sprog of course. ! I'm trying the new V1.7 version and must say, I do like the fact that the power panel is now part of...
... the changes of the CV's extra (you can see the armature turning over) but it will not go anywhere when you move the throttle - either on Decoder Pro or the...
