You can set the sort order of messages? Just click on the link in the date column. Your preferences will be remembered, so you don't have to do it again when you return.
After hearing from the author of the JMRI decoder pro files for the QSI V6 and V7 decoders that they work fine with his power pax set up I took a look at the...
The current draw problems only occur when the decoder is powered up and you will not capture it on a DVM. You would need an oscilloscope to see the inrush...
Andrew, Now what do I do? Have you had any of these QSI V6/V7 decoders to test? Have not heard from Bill Chown for a few days as he is on the road. Rick.--- In...
Rick, I'll be able to do some testing next weekend and I do have some ideas. I also have access to the QSI company, and so if my experiments do not reveal...
Yes, and yes it works! I have a heavy steam model and used the standard power supply that we also sell, no need for any other bits & bobs. Regards, Andrew...
There is a known issue with the JMRI throttle function controls and SPROG. If you are having issues, please do the following: Open a DecoderPro command monitor...
Jamie, I have installed two heavy tsunamis. Bachman heavy mountain, Bachman 2-6-6-2 and use the sprog to program and test them. It works great and is fun to...
Andrew, Thanks. The functions now work. I followed your instructions and now my proto 2000 GP9 does not just sit on the program track and laugh at me!, I can...
Thanks to all who replied. I can program fine with my NCE PowerCab, but need the benefits of DecoderPro, so I'll be getting a SPROG II very soon. Jamie...
Got one of the new sound equipped Bachmann 66's and I'm now trying to program it using SPROG and Decoder Pro. Unfortunately the loco doesn't seem to generate...
Would it make sense to add something to JMRI to do this automatically? We could provide a menu option to "Configure SPROG" in the SPROG menu. We could even...
Bob, It could be done I suppose. I thought I had fixed the firmware ages ago but something got lost somewhere. I have lots of changes to check in for the...
Ian, I am surprised at this as I have never seen it before. A stationary motor presents a very low resistance and the ACK pulse is usually more than adequate. ...
Hi Andrew, Found the problem, the ESU chips need to be programmed in Paged mode rather than direct. Once I switch DP over to Paged it all works fine. Ian ... ...
... Thanks! Was it a straightforward install or do you need to be a Linux hacker to get the serial ports working. My experience is purely Windows. Andrew...
Doh! I didn't even think to suggest something as simple as that. The fact that the motor was pulsing in direct mode led me to think it should work. There is a...
On Thu, 07 Dec 2006 14:26:10 -0000 ... I plugged the serial one into /dev/ttyS1 (COM2: to DOS people), ran jmri and it (as of the beta) works ok. Or you can...
I use a slightly different setting (H1808) that would be corrupted by this process. Perhaps adding a configuration option to the Tool menu would help. Bob...
Hi everyone, What a coincidence that is, I was just about to go one line to my Yahoo groups and lo and behold Sprog springs back into life. I have just...
Got a Sprog for Xmas from my lovely wife. Works quite well. Working on reading my locos and saving the files in DecoderPro (I use a PowerCab for my in-progress...
