You can set the sort order of messages? Just click on the link in the date column. Your preferences will be remembered, so you don't have to do it again when you return.
Just a note to say Andrew came up trumps for me in sorting out my Sprog - a very public thanks here for Andrews work - He had to reprogram the microproccesor...
Actually, I just replaced the whole SPROG. The old one is still awaiting proper investigation. No loco found means that there was no response from the decoder....
SPROG DCC will be away for Easter so we will not be able to process orders nor respond to e-mail or group messages from 6th - 15th April. Happy Easter to all, ...
In that case, an even bigger thanks <VBG>! I'll accept the former probability. the loco in question was Soundtraxx Shay decoder fitted loco. Cheers David--- In...
Hi There, I have just acquired the new Hornby Pendolino train pack and it runs very well using my SPROG unit and Decoder Pro but I am unable to read any CVs or...
If it's the same decoder that they sell separately then this behaviour is to be expected. The decoder is not truly NMRA compatible and does not support reading...
Hi Andrew, I have read most of the comments about the Hornby decoder but I have a feeling this is not the same decoder as it has 2 functions for the lighting. ...
Hi folks, I have now dismantled the Pendolino and examined the decoder closely and it does indeed appear to be the same as the Hornby 4 function decoder...
Hi, it's camry2200. I finally decided I'd had enough of junk mail, and installed a fantastic application that gets rid of it all. Unfortunately, you are not...
John, It's the c**p Hornby decoder. You might be better binning it and replacing it with something from another manufacturer - any other manufacturer. Ian In...
Hi All, I finally got around to trying my sprog usb. It is connect to the computer at 9600 (tried 57000 +) on com-4. I also have a loconet connection on com-4...
Hi group. Please ignore my prior messages.. I am all mixed up! Way back in January I had connected my SPROG II USB to port 2 at 9600, hardware flow control,...
Hello Larry, Your power supply that came with the SPROG II (yes, what you have is called a SPROG II) should be fine with a DH121 to read and program. So, which...
At 12:12 PM 4/30/2007, you wrote: Hi Bill, I am now convinced that the Sprog is bad. I have tried several different ports and combinations of port settings....
On Mon, 30 Apr 2007 19:42:13 -0600 ... Plug the sprog into the port on the PC and connect to it using a terminal application of some sort. If its communicating...
My Sprog arrived in the post yesterday, and I have started fiddling with it. It is a USB one, and I got it going with Decoder Pro. My first attempt was trying...
Hi, it's camry2200. I finally decided I'd had enough of junk mail, and installed a fantastic application that gets rid of it all. Unfortunately, you are not...
Hi Group with thanks to Bill and others trying to point me, and to other having trouble getting Sprog II to communicate even if you are sure you have windows...
Hi, I've seen this message come up on quite a few groups time and time again, some say he's a genuine chap others don't seem to be so sure. He's apparently...
I'll be there on Saturday with my modelling pal Derek Taylor. We will probably be pestering the ZTC stand. Must try their new mini decoders that they announced...
... again, some say he's a genuine chap others don't seem to be so sure. He's apparently been asked to reset his inbox and to stop sending out these emails, as...
Larry, That's good news. In general, however, I would recommend not going anywhere near the firmware upgrade tool in DecoderPro as it is not 100% reliable. The...
I have started fiddling with my new sprog. It is a USB one, and I got it going with Decoder Pro. I was trying to talk to a MRC AD310, I had no luck with this...
Duncan, Register mode is actually a subset of paged mode so you may be able to get access by selecting paged mode. I think (I've never actually tried it)...
Well I had another go at this and it all worked perfectly. I am reading the values and everything. So I suppose I just did not have it wired in correctly the...
... The capacitor generally needs to remain connected on the motor side of the DCC controller otherwise you may be causing interference to other radio users. ...
... Most of the decoders I've seen do not have sufficient if any suppression capacitors on the motor side. Doing tests with radio equipment also showed that...
hi I am having a very frustrating time with my Sprog II I cannot get it to function despite removing and reinstalling all the software. It was working ok but...
Tony, This looks like some kind of Java problem. Can I ask you to post your question on the jmri-users list http://groups.yahoo.com/group/jmriusers/ ? Andrew ...
