Hi Andrew and gang I have a SPROG and use JMRI to program my locos. Now, here is the problem. I want to change the sound profiles on a my Digitrax Sound...
Hi Group I have just part built my SPROG kit. upto the USB testing section. unfortunately I struggling. two separate issues I think ?? 1) My computer does not...
Ian, Unfortunately the answer is no, at least not at the moment. I am not aware of Digitrax making the sound download algorithm public but I will make some...
Andy, ... They are probably related. In case anyone isn't aware, the kit version is only available, to members, from MERG and is a slightly older (but fully...
Thanks Andrew Have double checked, but will triple check !!!, will also download AN232-02 from FTDI and follow advice,I have access to a scope, but ...
... That shouldn't be a problem. Andrew ... section. ... slightly ... attached, ... but ... responds ... change ... Double ... connector. ... assumes...
... Hi Andrew, Yes, I have used my SPROG to programme a Challenger, a Big Boy and some F unit diesels (all Athearn Genesis fitted with MRC sound decoders) and ...
Hi Andrew Got it working, yippee. Output of 5v reg quite low 4.2v I turned up VR1 full up. Output of variable voltage reg is now 12.7v Some voltage drop...
Hi Andrew Got it worki.…. `O' dear …. !!!!..... Tried to update Firmware to v3.9, unfortunately I did not see your warning about using DecoderPro on your...
Andy, Oh dear. It's actually an issue with the SPROG rather than DecoderPro as such. If you look at the very last line of the hex file and try typing that in...
Raul/Andrew.....that worked like a charm!!! now I can hear all the sounds on the Sounder. Is their a DecoderPro function panel available with more functions? ...
Andrew et al in the SPROG group (posted to JMRI, as well since some SPROG users may not be reading the Sprog group). the Broadway Limited Sound decoder is in...
James, Sorry for the delay in replying. I just posted this in response to ... SprogII....< ... (byte) Mode. ... into ... Apologies for not jumping in sooner....
Andrew???? ... Subject: Re: [BLI-PCM] Re: DC Master on sale at ModelTrainStuff for $24.99 to program Blue Line CVs Date: Fri, 16 Nov 2007 09:06:26 -0800 ...
I can write and read to Soundtraxx decoders with the SPROG without problem. I have a decoder I am using for sound only, but don't know if it is Sound only or...
It really depends how you interpret the NMRA RPs. Continued below. ... decoder ... Addressing ... Programmer, or ... That's quite clear. ... he is ... command ...
I fail to see why a sound decoder can work in direct byte mode and not in direct bit mode or paged mode. The speaker load excuse sounds like a smokescreen to...
Since this is obviously a hot topic I will look at a firmware modification for the SPROG to enable support for Blueline decoders. Watch this space... Andrew...
Andrew: this is apparently everyone's basic objection to the Blue Line sound decoders.... from the history (which may be totally incorrect rumors) I have...
Will a sprog drive a dcc booster such as the " new Merg booster" using multiple throttles ? I realise there would not be ack back so I would use my sprog...
It is indeed possible to drive an external booster. The MERG new booster has opto-isolated inputs so there are no interfacing issues. Just connect it to the...
I just received two new Atlas O GP9s equipped with V7 QSI decoders. I bought my SPROG becasue my Digitrax system had so much trouble with Soundtraxx decoders,...
... one exception of QSI decoders. I have been waiting for over a year for the solution from Bill Chown or Andrew but so far no luck. The SOLUTION for me is to...
Well, I hope it doesn't come to that. Have you had any recent feedback that they are actually working on a SPROG solution - or are we only hoping here? I...
