You can set the sort order of messages? Just click on the link in the date column. Your preferences will be remembered, so you don't have to do it again when you return.
Andrew et al in the SPROG group (posted to JMRI, as well since some SPROG users may not be reading the Sprog group). the Broadway Limited Sound decoder is in...
James, Sorry for the delay in replying. I just posted this in response to ... SprogII....< ... (byte) Mode. ... into ... Apologies for not jumping in sooner....
Andrew???? ... Subject: Re: [BLI-PCM] Re: DC Master on sale at ModelTrainStuff for $24.99 to program Blue Line CVs Date: Fri, 16 Nov 2007 09:06:26 -0800 ...
I can write and read to Soundtraxx decoders with the SPROG without problem. I have a decoder I am using for sound only, but don't know if it is Sound only or...
It really depends how you interpret the NMRA RPs. Continued below. ... decoder ... Addressing ... Programmer, or ... That's quite clear. ... he is ... command ...
I fail to see why a sound decoder can work in direct byte mode and not in direct bit mode or paged mode. The speaker load excuse sounds like a smokescreen to...
Since this is obviously a hot topic I will look at a firmware modification for the SPROG to enable support for Blueline decoders. Watch this space... Andrew...
Andrew: this is apparently everyone's basic objection to the Blue Line sound decoders.... from the history (which may be totally incorrect rumors) I have...
Will a sprog drive a dcc booster such as the " new Merg booster" using multiple throttles ? I realise there would not be ack back so I would use my sprog...
It is indeed possible to drive an external booster. The MERG new booster has opto-isolated inputs so there are no interfacing issues. Just connect it to the...
I just received two new Atlas O GP9s equipped with V7 QSI decoders. I bought my SPROG becasue my Digitrax system had so much trouble with Soundtraxx decoders,...
... one exception of QSI decoders. I have been waiting for over a year for the solution from Bill Chown or Andrew but so far no luck. The SOLUTION for me is to...
Well, I hope it doesn't come to that. Have you had any recent feedback that they are actually working on a SPROG solution - or are we only hoping here? I...
... he was in England at the time and I believe was consulting with Andrew. I have the sprog 2 and a lokprogrammer and next will be the quantum programmer...
It is still very much a hot topic. The problem is that both V6 and V7 decoders that I have (thanks Bill) are really quite reliable for me. The V6 has a known...
Andrew, I've got a QSI chip fitted in an AD60 from Eureka - I've had to use the manual reset several times to reset the address to its default as It's never...
The current surge at power on and during ACK are the interesting measurements but you would need an oscilloscope to capture them. If you have one, then I can...
I'm working on a fix for programming BLI Blueline decoders. Logistically, it would be a lot easier to work with someone in the UK for testing it. Andrew...
I may have found the problem! Shortcuts I took a long time ago mean that SPROG only looks at the 8 LSBs of the 10-bit A-to-D converter in the PIC. The...
I connected my SPROG II to a 12 VDC 10 A PC power supply rail. It didn't seem to have any effect on the erratic reading of QSI CVs that I've been seeing. ...
I hate to ask this but......how hard will it be to get a "firmware" update (if that is indeed a fix)? Hopefully just a chip "pop & push" and not a surface...
Clark: fortunately, the firmware can be updated over the net: "2.3 Upgrading SPROG Firmware Occasionally it will be necessary to release new versions of the...
Clark, Firmware is the term generally used to describe embedded software. A firmware upgrade would be sent out by Andrew and you'd upload it once to your SPROG...
