You can set the sort order of messages? Just click on the link in the date column. Your preferences will be remembered, so you don't have to do it again when you return.
Hi all, I've set up a Frappr map for anyone who wishes to add themselves and tell other users where they are: http://www.frappr.com/sprog-dcc Enjoy! Andrew PS...
... while I am on here can you confirm that my lenz set 02 will drive trains via an interface from the computer, but not program them I have sprog 11 (usb) any...
... No it just works 8) Although some day I'll need to get a list of the USB messages that are used, write a driver and buy a USB one. Until then I'm happy...
Hi I have just added myself to the map. As to SPROG all my locos are up and running despite limited track and now I am trying to reduce the backlog of painting...
Andrew, I'm using an original version 4.0 SPROG which was recently upgraded from firmware version 3.8 to 3.9. Since performing the upgrade I've noticed ever...
MyMy new Sprog II usb arrived 2 days ago so ----------- It seemed to install Ok and I was up and running! Using Decoderpro 1.7.5 I seem to get inconsistant...
Trevor, Sorry, I don't know about the capabilities of the Lenz set 02. I would have thout you could program trains using the Lenz computer interface. You...
... about ... The USB version uses Virtual COM Port (VCP) drivers so it behaves just like the serial version as far as software is concerned. No need for ...
Bob, I haven't seen that problem before. What output do you get from an M command sent to the SPROG? I'm wondering if one of the mode bits are somehow stuck in...
Martin, This kind of behaviour often results from using a power supply that isn't pure DC. It needs to be regulated 12 - 15V. What are you using? Can you try...
Andrew, I would have thought that my power supply was ok but I will try a 12v SLA batteryand see if any different. My supply is 15Vac , bridge rectifier and...
... Thats actually all I needed to know. Linux has an FTDI chip driver already for just about anything using the FTDI protocol. Just needs the vendor/device...
... own ... the ... I'm can't afford the $2K per year for a unique vendor ID so: Old USB SPROGs (pre SPROG II) use the default FTDI VID and PID and should just...
I am just starting to use the sprog I bought last year. I saw some messages re firmware update. Should I look to see if this is a needed upgrade? Stan Stan...
Stan, You do have an older version but if it works OK for you then there is no need to upgrade. You will need to upgrade if you use digitrax decoders and wish...
I have not had a problem, but I am saving to purchase a couple of Tsunami decoders. What should I do to get the sprog upgraded? Thanks Stan Stan Hall 2402...
Hi All I have managed to get a single throttle working ok (most of the time) Using JM\RI 1.7.5 But unable to get any response from the Function buttons or...
Martin, I get the same results from a Sound chip with lights on a SWD class 24. It all works tickaty boo on the ZTC 511, but change it to the Sprog, and...
Hi All, I have one of the very early Sprog I's... I can now do just about everything from Sprog and DP as I can from the base station. However, I would like to...
As far as I am aware, the code in DecoderPro is OK unless it has changed in the latest version. I have certainly had the functions working when I was playing...
SPROG can do anything DCC if you send it the correct instructions;-) I have never actually tried using SPROG with PanelPro (which I think you are alluding to)...
Andy, I can vouch for the SPROG II operating LS150's through PanelPro, I have my layout set up with separate DCC bus's for Track and Points. The points Bus is...
Mark, That's excellent news, thanks for the feedback. Yes, items in a SPROG system are numbered S for SPROG T for turnout, giving STnn. Lenz make some...
Hi Guys, I got a bit of a problem. Last weekend I did my first LokSound installation: it was really easy, quick and simple. With the Roco system it runs...
Based on information found in the SPROG II Installation Guide "Loco with sound decoders may benefit from a higher capacity power supply" then the recommended...
... with ... the ... That wasn't there last time I looked! ... I know about QSI sound fitted loco's having a large current inrush when first put on the track...
