You can set the sort order of messages? Just click on the link in the date column. Your preferences will be remembered, so you don't have to do it again when you return.
Have people managed to program accessory decoders via a Sprog? If so which ones & were there any problems? I don't use accessory decoders so have never tried...
I've had limited success with a CVP AD4. My own servo decoder definitely works ;-) MERG decoders should work. For best results you need to be sure the...
I just purchased a sprogII and it has came as far as the local post office!! Wife will pick it up tomorrow and I can then play. I hope to learn from you...
I have just installed my sprog on to a computer with Windows Vista on it and have not been able to ident any loco's on it. It reads CV7 & 8. and then says that...
Are you saying that both the loco and SPROG work on a Windows XP system? The fact that the loco responds shows that communications is OK and I would say that...
... You can export individual entries as CSV (comma-separate-variable) files. Open the locomotive as if you were going to program it, and look under the...
Well my Sprogg 11 arrived to-day, only eight days, Airmail x the UK to New Zealand. Have installed all the software coupled the unit up and have had a play...
... Have you read the help screens in JMRI / Decoder Pro ? They cover the basics and where some standard errors with start/mid/top speed settings. Or, with...
Nigel. Many thanks for your observations and thoughts on where to get info from. Never thought of the help file. I think that it is the classic case of "if all...
Hi All, I have just built my SPROG from the MERG kit, but it doesn't work! It's my first SMD kit, but I have done some SMD work before. Anyway, I built it with...
Michael, Yes, the fix went into versions 2.1 and 1.6 for SPROG II (both USB and serial). One of the mode bits (bit 6) is used to select a different programming...
Hello, anyone else been in this situation ? Within JMRI, Command station mode used to work on my setup. Now it doesn't work; cannot write to decoders and...
Answering my own question. The Sprog PSU needs to be turned off/on when going from "Sprog" to "Sprog Command Station". No idea why, but that seems to solve...
Good Evening Group Yesterday I purchased a TCS M1 decoder to go in a single motor Spectrum/Bachman GE44 Tonner. I wired it up as the TCS web site and also the...
Do others have experience with TCS decoders and SPROGs? I have a TCS T1 on order - should be with me on Monday I hope. I also really hope it works!!! I'll let...
Hi Andrew All my other decoders have been either Lenz (Superb) NCE seems ok(only just tried playing) LocPilot (not yet fitted any but come highly recommended) ...
Hello Guys OK I have found the problem. I had been using the piece of track to run in a loco with DC on my rolling road and even though I had turned off the...
... If your budget runs to Lenz Silver/Gold Mini decoders, then try a Zimo MX620 (or MX63 if you have more space) . In my experience (very small motors), the...
... Urgh! on both counts. I'd go a little upmarket from there if I were you. ... Have you seen the JMRI discussion list thread about adding the mouse-wheel as...
Hi All, OK on the "urgh" on the Bachmann and Hornby decoders. I'm just starting out so want to do this as cheaply as possible! I already rate the Bachmann...
Chris, if you are waiting for a QSI fix to SPROG, that is completed. Contact us to get your system upgraded to the latest software. I have used a number of TCS...
Hi Bill I am in contact with Andrew and will be visiting him in due course. 1. For the up grade 2. To collect my QSI proto 080 he has had on test. I have now...
Chris, TCS decoders offer full user control over the amount of dimming with CV 64. TCS recommends values from 2-8 for LEDs, the factory default is 15, but you...
Hi Barry Yes I read up on CV64 although not sure what I should put in it to get what I want. I am using JMRI and it does not have CV64 in the CV Tab, so it...
Chris, You can program a single CV value by using the "Tools" "Programmers" "Single CV Programmer" from the DecoderPro main menu. That way you can see the ...
