Chris, if you are waiting for a QSI fix to SPROG, that is completed. Contact us to get your system upgraded to the latest software. I have used a number of TCS...
Hi Bill I am in contact with Andrew and will be visiting him in due course. 1. For the up grade 2. To collect my QSI proto 080 he has had on test. I have now...
Chris, TCS decoders offer full user control over the amount of dimming with CV 64. TCS recommends values from 2-8 for LEDs, the factory default is 15, but you...
Hi Barry Yes I read up on CV64 although not sure what I should put in it to get what I want. I am using JMRI and it does not have CV64 in the CV Tab, so it...
Chris, You can program a single CV value by using the "Tools" "Programmers" "Single CV Programmer" from the DecoderPro main menu. That way you can see the ...
Chris, In addition to the Single CV programmer, you can access CV 64 through the Comprhensive Programmer (normal) view. There are actually 4 TCS M1 definition...
Hi Bill A big thank you I was using the wrong decoder file! When I did "Read type from decoder" it choose Train Control Systems / TCS Mx series decoders / M1 ...
For your interest, there is a new group.. http://groups.yahoo.com/group/Viessmann-Halt/ The Viessmann Commander, is the Ultimate in controllers.. also there's ...
JMRI 2.1.7 is now released. Although it is a test version, it does have some potentially useful features for SPROG users. The SPROG "Get SPROG Firmware...
Please use the new version utility in JMRI 2.1.7 (see previous post). If you have v2.4, then please read on. An update is now available to fix issues when...
Hi, I've used and fitted these before myself, and had no problems. Just been given one purchased this week to fit in a Heljan 47 (Loksound v3.5) for a friend...
Hi all, Done some more checking with this, tested fine on layout with Dynamis controller, but return to Sprog & decoder Pro, all is not well. The only...
Guys, having some problems with my programming track. I use a SPROGII (I believe V2) hooked to my PC running JMRI version 2.1.7 I fitted a ESU locsound to an...
Have a question, I have mounted my sprog in a home brew "all in one" holder that contains my dcc system, my sprog, and a few power supplies, as well as...
... one" ... supplies, ... switch ... sprog ... affect on ... at a ... for ... on a ... Hi bob the only problem i have had leaving the sprog powered up was ...
Bob, I have inadvertently left my SPROG unit 'powered up' for many hours, sometimes overnight, without any obvious problems (so far!). I also have a switch...
I usually leave mine power up, sometimes for days at a time, and have not had any problems. I also have my railroad equipment electronics running thru a UPS to...
Please can someone give me some guidance on how to read the CV's using the Sprog on the Lenz LS 150 accessory decoder, I have tried to do this with out much...
I'm not sure if the LS150 can be programmed on a programming track. I think it needs to be "programmed" by sending accesory commands to it whilst connected to...
I am finally recovering from a lightening strike that took out all my computers. So now I have a new PC to connect to the layout and programming track. I...
Clark, The Loco Buffer uses an FTDI chip similar to SPROG but you need to install the drivers for both in order to get the correct setup. i don't anticipate...
I bought my Sprog last month. I have installed it on a Dell Notebook that already has Java and DecoderPro installed and has (and still is) worked fine via its...
Brett, Did the SPROG ever work or did this all happen from the first time you tried it? It sounds like the software setup is fine and the PC is communications ...
Hi Andrew, Answers below: ... Happened from the first time I tried it. ... Currently trying with an NCE D12SR which is working fine on the layout itself and...
... Brett, I in no way mean this to sound sarcastic, so don't take it that way please, but is the track connection good and the decoder fitted well (I.e no bad...
... system. ... system ... Just read your reply to Andrew on the web (I have messages downloaded as a group) - Sorry, I have been teaching you to suck eggs. ...
Hi Andy, Not offended at all. For everyones info I live in Australia and model US prototype. I have installed about 10 decoders myself in a combination of...
