Do you have a particular problem, or just asking? There should be no problem, so long as the decoder has a load connected to the motor terminals, otherwise you...
If it's Item 51900 then it includes a motor and flywheel Ian In message <gh0omf+q1kp@eGroups.com>, andrew_croslanduk <andrewcrosland@...> writes ... ...
David I am reliably informed that there should be no problem, just treat the tester as a programming track, it has all the relevent loads etc to function as if...
David, I have one of these ESU units, and it works very well with SPROG II. I have used it for ESU decoders, but also for many other types. The light and motor...
Thanks to Utz -R. Kaufmann there is now a German translation of the SPROG User Guide on the SPROG DCC download page. If anyone could help in proof reading I...
... Anybody interested in updating the JMRI DecoderPro German and French translations? Starting in January, we also hope to be able to have translated decoder...
Can anyone help me, maybe off-group, to adjust the volume of my (mostly) Massoth xls decoders. Also help to grasp Function mapping would be welcome. Thanks, ...
Hi All, I have a particular problem, I wonder if anyone can help please? Whereas my Sprog II works fine in Service Mode Programming, plus the throttle routine...
John, What do you mean by a reboot of the power supply? Turning it off and on? Does turning the track power off and on from the throttle help at all? Could you...
... and ... all? ... running ... Hi Andrew, Re-booting the Sprog Power Supply means turning it off and back on, yes. Turning the trck power on and off at the...
Hi Keith, It sounds more like a decoder pro problem than a SPROG problem. Which version of Decoder Pro are you using? I have a really odd problem with it too -...
Andrew, Sorry for the delay in your message. It got trapped as spam for some reason and I didn't notice it waiting for my attention. If you try to control...
... Which ... with it ... nothing ... doesn't crash ... and ... all? ... 40yahoogroups.co.uk>, "Keith ... that, ... in ... running ... Hi Andrew, What you are...
Hi Andrew C, No problem at all! I think (but can't confirm as I've not investigated it too closely) that it's the second throttle that's opened that doesn't...
Hmmm... methinks this (at least my problem) is a red herring! Please don't worry - I think it's working fine - it's just my loco and my track. I'm still in the...
Andrew, Thanks for letting us know. The Yahoo spam filter doesn't like you for some reason! Andrew C ... couldn't ... continuity, ... investigated ... I ... ...
Actually - I'm not sure that it is a red herring. I set up a loco with a brand new decoder this afternoon. It worked perfectly in program mode, but not in...
Ooops - not sure how that happened. No 2) in ops mode should have been: rep: "P> " cmd: "O 2C 3F 81 92" rep: "P> " cmd: "O 2C 3F 81 92" rep: "P> " cmd: "O 2C...
Hi Andrew, etc... How strange... I really don't know what's going on at all! Identical setup in another loco works just fine. Same decoder, same setup. Just ...
OK... Now I'm baffled... Sorry to keep mailing the list like this - maybe that's why my e-mails are coming across as spam! I haven't changed anything, and...
Hi Kieth/Andrew C, I have found the root of this issue! If you use the SPROG in programming mode, and then immediately use it in command station mode, it...
Andrew, Thanks for that. I don't have any ideas at the moment, but I'll hopefully get time to look at it during the holidays. Two questions. Does it only...
Andrew B, Before switching to command station mode try using the throttle (in programming mode) to release the loco you were running and select a different...
... in ... he ... mode, ... problem, ... be the ... firmware - ... Hi All, Just an up-date of where I've arrived at - yes, cycling the Sprog power supply...
Hi Andrew C, OK - thanks for the info - I'll give it a go. I've not had a chance to do any further investigation. Still using XP SP2 - however, I have a ...
If I can stick my 2penneth in, I can't get it to work as a throttle full stop with one exception that I will come to. As soon as I change to Command Station...
Hello everybody. I have recently put together a MERG SPROG kit and then found this user group. While looking for some control software, I was surprised to see...
... [...] ... Yes, I know about Rocrail, and agree that it looks to be a more attractive layout control program than PanelPro (JMRI) to someone from a UK/EU...
Just a quick note - I have had quite a lot of success with using an Xbox (original) controller as a USB throttle with DecoderPro - my development efforts are...
