Sign In
New User? Sign Up
stuartspeugeot306club · Stuart's Peugeot 306 Club - Information for Peugeot 306 owners
? Already a member? Sign in to Yahoo!

Yahoo! Groups Tips

Did you know...
You can set the sort order of messages? Just click on the link in the date column. Your preferences will be remembered, so you don't have to do it again when you return.

Messages

  Messages Help
Advanced
Re: [Stuart's Peugeot 306 Club] Standard radio   Message List  
Reply | Forward Message #406 of 1411 |
Re: [Stuart's Peugeot 306 Club] Standard radio

first things first mate, i cant even get the front panel off to get
the pin slots for the radio! how does this come off???? (the one that
sits over the heater controls) Its in a n reg dt

Any help would be greatly appriciated

jamie
--- In stuartspeugeot306club@..., "Baker, James"
<james.baker@u...> wrote:
> Its pretty simple, you just need 2 long thin metal rods (I used 2
long thin
> screwdrivers) which are inserted in the two holes either side of the
> console. You then push the rods away from each other. You may have
to play
> around with how far the rods are inserted. Basically, inside each
hole is a
> little metal catch which locks the radio in place. Once you're in
the right
> spot, it doesn't take much force to unclip it. The radio's are
usually
> fitted very tightly though so you may not think its unclipped when
it is.
>
> Hope that helps.
>
>
>
> -----Original Message-----
> From: geest54 [mailto:jamie_reynolds1@h...]
> Sent: 06 October 2003 17:51
> To: stuartspeugeot306club@...
> Subject: [Stuart's Peugeot 306 Club] Standard radio
>
>
>
> Can anyone tell me hoe to get the standard radio out of the centre
> console, its starting to drive me bonkers and i don't intend paying
a
> garage £40 to get the boy out?
>
> Any suggestions please
>
>
>
> Yahoo! Groups Sponsor
>
>
> http://uk.groups.yahoo.com/group/stuartspeugeot306club
> <http://uk.groups.yahoo.com/group/stuartspeugeot306club>
>
> To unsubscribe from this group, send an email to:
> stuartspeugeot306club-unsubscribe@...
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> <http://uk.docs.yahoo.com/info/terms.html> Service.
>
>
>
>
**********************************************************************
**
> The information contained in this EMail and any attachments is
confidential, may be subject to legal privilege, and is intended
solely for the use of the addressee. Any unauthorised dissemination
or copying of this EMail or its attachments, and any use or
disclosure of any information contained in them, is strictly
prohibited and may be illegal.
>
> If you have received this EMail in error, please notify us
immediately by telephone. The EMail transmission, together with any
attachments, must be deleted from your system and any hard copies
destroyed.
>
> Mayne Pharma cannot accept any responsibility for the accuracy or
completeness of this transmission, and does not authorise any
contract to be made electronically.
>
**********************************************************************
*
>
> [Non-text portions of this message have been removed]




Tue Oct 7, 2003 4:04 pm

geest54
Offline Offline
Send Email Send Email

Forward
Message #406 of 1411 |
Expand Messages Author Sort by Date

The Haynes manual tells you how to make the special tools needed for the job. There are different tools for Clarion or Blaupunkt headunits. I don't have access...
Espen B. Olsen
espenhjemme
Offline Send Email
Oct 6, 2003
5:10 pm

Its pretty simple, you just need 2 long thin metal rods (I used 2 long thin screwdrivers) which are inserted in the two holes either side of the console. You...
Baker, James
jamesebaker_...
Offline Send Email
Oct 7, 2003
8:14 am

first things first mate, i cant even get the front panel off to get the pin slots for the radio! how does this come off???? (the one that sits over the heater...
geest54
Offline Send Email
Oct 7, 2003
4:04 pm

You shouldn't need to take the whole middle panel off - the metal rods goes in the tiny gap between the radio and the panel you're describing. Well, that's...
Espen B. Olsen
espenhjemme
Offline Send Email
Oct 7, 2003
4:51 pm

the stereo is flush with the panel, where abouts' is the gap is it at the sides lin a normal din size stereo or are they at the bottom/top? jamie ... rods goes...
geest54
Offline Send Email
Oct 7, 2003
7:41 pm

Completely flush? Hmm.. In the pic I saw they were at the _bottom_ of the radio. The radio itself had a "parralleloid" shape and was not part of the larger...
Espen B. Olsen
espenhjemme
Offline Send Email
Oct 9, 2003
2:20 am

No, all Peugeots even the new ones have the same standard factory fitted CD player. Just look for 2 holes next to the actual unit. Make sure you're not looking...
Baker, James
jamesebaker_...
Offline Send Email
Oct 9, 2003
8:14 am

thanx for the help boys, after an hour of messing around it final came out!!!! thanx again and keep up the good work!!!!! cheers jamie ... fitted CD ... you're...
geest54
Offline Send Email
Oct 9, 2003
2:50 pm
Advanced

Copyright © 2009 Yahoo! UK. All rights reserved.
Privacy Policy - Terms of Service - Guidelines - Help