Hi Hope someone can offer help? The nternal fan will not work at any position and although there is ai moving through there is no heat, just cold air forced...
i can't say so much for the fans, but the light behind the clock is a common thing. it's a simple bulb replacement. pop the panel out, get the bulb out of the...
my beloved 306 is playing up once the car has warmed up and you come up to a junction or roundabout and you put your foot down it goes to stall then the revs...
... just ... clock ... fuses ... of ... known as a rearstat. this is a resistor that controls the fan speeds. this is easy to replace and you will find it very...
... butterfly, ... come ... goes to ... but to ... that ... my ... thanx for your suggestion but sadly i have done this (should of mentioned this) ive also...
Have any of you guys put a diesel engine in a 306 cabriolet?Just curious as to whether it can be done?If it can is it a pretty straight forward conversion?...
Can anybody tell me what the clearance between the rear wheel and the arch should be on a 306 1.9td please,i have got a feeling my rear shockers are worn out...
Not sure why you would want to, but no it's not a straightforward thing to do, virtually everything including wiring and fuel systems would need to be changed...
If the rear wheel clearance is noticably less than the front when parked on the level then yes, you've got a suspension problem somewhere. Just get it checked...
i used to have one of these. in fact, exact year and model too. the miami is the bare-minimum 306, so there's no alarm, central locking, et al. i didn't have...
just bought a 306 1.4 miami everything seems ok but i sometimes hear a ticking noise,the same noise you would asociate with the indacators,someone said it may...
Hi does anyone have any advise on this,i tried to get a spare key cut today for my 306 but was told it would cost around £20-25 because i need a key with a...
it's true. although they did ship the 306's with one key with a chip, and one without. basically, the key without the chip won't be able to disarm the alarm or...
thanks for that dan i forgot to mention i have no central locking and no imobolizer so maybe if i did get a cheap one cut do ya think it may work? thanks...
Like you say, in that case, I'd risk just getting a new key cut. I think it should work. Stuart http://www.stuartdalby.co.uk/peugeot306 ... From: jay...
I got a normal key cut which does open all the doors but wont start the engine,so i suppose it will save the wear & tear on the ignition key. the ticking noise...
Hi Dan, Glad you're having some success. Are you absolutely sure your car doesn't have an immobiliser? I did think all 306's had immobilisers and...
that's a bit weird, because i had a 306 miami, of the same age, and i'm pretty sure it didn't have any alarm/immobiliser on it. it had 2 standard keys with no...
Dan, When you say your car had 2 standard keys do you mean it had 2 Peugeot keyfobs but without any buttons or 2 metal keys (i.e. all metal, no plastic...
I have no button on my ignition key and the spare key i got cut wont start the engine.it sounds like it wants to start but doesnt,gotta check for sure weather...
it could well be. as far as i could tell, there was no chip inside either of the keys. it was just a block of plastic on the end of the key itself. but both...
... It may be the indicator switch as well as they are known to be a problem sometimes. i had to change mine as the clicking was getting worse. does ti get...
dont know if anyone else has had any problems like this but sometimes when i come to a roundabout or junction i change down to first to get ready to pull away...
I vaguely remember my 306 was sometimes a little reluctant to engage first gear sometime. I think I got into the habit of selecting the gear just before I came...
