If your injector has got anything leaking out, then it will also leak air in - so you should have found your problem. I'm sure the haynes manual had some stuff...
Re: Larger batteries. I guess they do this in the UK though UK retail services are atrocious these days, pile it high sell it cheap unfortunately. Anyway the...
Yes you are right about the battery size issue. When I decided to replace my 55AH battery, I had a choice between a 65AH and a 75AH, with not much difference...
The leakage could also be due to a leaking "return" tube, the small rubber tube that goes from one injector to next. If so, replacing the tubes (as a set) is...
Yes that is a good idea with the pipes, I have seen a set of clear testing tubes. If you get some of those (perhaps standard clear pipe will do?? with it only...
Yes - standard aquarium pipes have worked excellently for me over the past one year. However, I still check them regularly since I am not sure about their ...
Hi Guys, Well as promised here is an update on my engine repair. We decided to remanufacture the crank shaft in order for us to put on a new bottom pully....
Hi I had the intercooler off today to have a look at the injectors and I discovered that the oil is coming from a large-ish pipe connected to the head above...
... Hi everyone I have lurked around this group and saw this posting on radio code. So I decided to join. I live in France and recently took my 306 HDI break...
First of all many thanks to everyone who has offered advice - very gratefully received. As it turns out, my code doesn't appear to be entirely lost. I ...
Hi John, Just noticed you wrote your "radio/GPS" needed the code - does this mean the 306 was available with factory fitted satelite navigation as an option? I...
Never heard of it being fitted to the UK Models even as an optional, It's like the French 106 could have A/C but never fitted to the UK Version. ... From:...
... optional, It's like the French 106 could have A/C but never fitted to the UK Version. ... Hi Espen I found my Peugeot 306 HDI break/estate on the internet ...
1.9 d 3 door, in green. Half Leather seats, 41-60mpg, ins group 4. 56,000 miles. Lady Owner. Service records. MOT until sept 05 Tax until feb 05 New rear...
Hi all, I have a problem with the my 306, someone smashed into the front of my car while pulling out of a parking stop in front of me and ripped the front...
95M 306 1.6XS I have noticed for some time that my car has been showing over 90 degrees on the temp guage, more like 100, and am concerned that this is not...
I have a 306 Meridian (1998 Turbo Diesel). With the cold approaching, I've turned up the heating on my control panel. I've noticed that with warm air (not...
My Heater Matrix went and I went to a local mechanic who recommended that I try to Use Radweld or a similar product before trying to replace it! I got...
Hello chaps I should learn to keep my big mouth shut. My son, having bought a second hand Peugeot 306 XTDT L reg. from a friend and using it occasionally for a...
Get down the loacl scrap yard and get your self a new loom, be careful though there are a lot of variations.Then get your soldering iron out :) Replaced all...
Thanks Daryll. So even if I get a new loom, it's not just a plug it in and go eh? And I still have to remove all of the front fascia to get the loom out?...
Yep the other set are under the bonnet, One other thing i found annoying, is that theres is no explination of the relays!!! My electric mirros and FR speaker...
Yes, I did consider trying to solder them, but they appear to be in such a bad condition. There are at least 6 wires that have been severed and another couple...
I wouldn't worry too much about soldering, just make sure you get a good strong flux use it along with a flux cored solder wire then clean the joint with a bit...
Well I had mine done by Toomey Peugeot Brentwood. Total £220. This was for two hours labour and parts. How ever the total time was for 4 hours but since it...
