You can set the sort order of messages? Just click on the link in the date column. Your preferences will be remembered, so you don't have to do it again when you return.
See messages 736, 739 and 743 Get V2.50.10 or V2.60.00 if you haven't already. V2.60.01 did not work on my Wme or W98se machines Make sure you have JET...
See messages 736, 739 and 743 Get V2.50.10 or V2.60.00 if you haven't already. V2.60.01 did not work on my Wme or W98se machines Make sure you have JET...
The Component bar: Components are arranged in groups, named by the tabs on the Component bar. Once you have selected a group, the available component symbols...
Hi. This is my first post and first tryout of TinyCAD. I want to use a 28pin SSOP package in my circuit layout. The nearest I can find in the library, is a...
milesdj8
awex@...
Oct 15, 2007 1:02 pm
826
Yes - sort of!! 16F876 in the 'Microcontroller' library is a 28 pin symbol but it does not have a 'Package' attribute for use with a PCB layout program (eg:...
Yes - sort of!! 16F876 in the 'Microcontroller' library is a 28 pin symbol but it does not have a 'Package' attribute for use with a PCB layout program (eg:...
I don't understand this message. Please explain. What is 'The Component bar'? What sort of 'code' is requested? Is it a request for a new feature? Is this...
I downloaded TinyCAD after reading about in QST and gave it a try. I could not open any of the example drawings, nor could I open any drawings that I had...
swingdog2001
raven306@...
Oct 18, 2007 8:23 am
830
Please supply a bit more info: - Operating system[eg: W 98/ Wme/ W XP/ W Vista etc.] - TinyCAD version[eg: 2.60.01] - is JET database engine installed(see...
As I created the circuit and need to simulate it, I had created a Spice files from TinyCad. But how do I import the .net file into Spice Opus simulator which...
This process will achieve the desired outcome Step 1 Find a schematic component symbol that looks a bit like what you want. Step 2 Copy it and save it with a...
I have been trying to load TC into an old lap top running 95 and it keeps asking for dll's that are not in the computer. It finally hung up when it told me to...
Jack Schmidling
jack@...
Oct 31, 2007 5:50 pm
837
I set the paper size to 215 x 279 for 8.5 x 11 inches. I then set my printer to scale 90% and that worked OK. It also has a check box that says "fit on one...
Malcolm - When solving similar problems with other packages, I have found that a PDF writer has much better control over its outputs than any other printer ...
Apologies in advance - as this is almost certainly something I'm doing! I need to create some simple netlists for testing purposes for our software. However...
Worked out a solution: Just adding power and Ground wasn't good enough - I had to add a component and actually connect them up - then my power/ground pins on ...
Just wanted to say that I installed TinyCad over the weekend and enjoyed using it for a project. Its quite capable. To those that have contributed to it -...
Have you either named the nets suitably or connected them to the power source? You seem to need to connect at least one section of a multi-part package to the...
... Got them both but one yesterday and the other this morning. Thanks, js -- PHOTO OF THE WEEK: http://schmidling.com/pow.htm Astronomy, Beer, Cheese,...
I have created a new symbol for an analog IC (simply a square with 14 pins). When I use it in a design some pins cannot be connected. On the screen the wire...
I have not seen this unless I have the 'Allow resizing' flag set on a symbol and other options unset. Probably not all combinations will cause it. Make sure...
... If a symbol pin is defined with the 'Centre pin name' checked on a pin, the connection point when used on a schematic moves to the opposite end of the pin...
Hi, A couple of days ago I downloaded and installed the version of TinyCAD that is on the SourceForge site Its version :2.60.01 I now have had 2 different...
