You can set the sort order of messages? Just click on the link in the date column. Your preferences will be remembered, so you don't have to do it again when you return.
Did the file pass DRC when you first saved it? (Before you exit TinyCAD) == Are the connections properly made? (If you have re-scaled symbols the pins may be...
... Hi, This is an old bug (or feature). My guess is that you are working off grid with the components you are having trouble with. If you are slightly off...
Hi all, My name is Tom and I am fairly new to TC but have up till now been able to make it do exactly what I wanted. I teach electrical at a trade school and...
Yes - n x 90 degrees is what you get. However have a look ithe 'Files' section at 120degcoil.dsn. It is not a perfect solution but if you create some symbols...
... I don't think this is possible in TinyCAD. You can achieve almost the same effect by turning off "Options->Snap to grid" or setting a fine or custom grid...
Phil, David, Thank you for the responses I do appreciate it. I kind of figured I would be unable to accomplish what I wanted but Phil you have come up with a...
I've not seen a '723 in the standard libraries. I have made two versions (DIL and metal can pin #s differ) and uploaded them in 'Feb08_spare.mdb' into...
I've not seen a '723 in the standard libraries. I have made two versions (DIL and metal can pin #s differ) and uploaded them in 'Feb08_spare.mdb' into...
Hello, TinyCad asked for the file DAO.msi when installing on to my PC which runs Windows XP Service Pack 2. Can you help me to find this file and I'll...
See messages 878 -882 <Quote> Re: Install aborted due to not locating the file dao.msi There is a download for the JET database engine on the TinyCAD site but...
Phil thanks for the info. Yes they still make them. Of course the reason that I remember them is I am pretty ancient. Maybe I need a refresher course to catch...
I must be pretty ancient too. I remember using them in a switch-mode PSU. Almost impossible to stabilise over any great range to meet a spec. in the late 70's ...
Total newbie here. Analog Devices has libraries in symbols and footprint files, formats are MultiSim, Orcad, Protel99. Can I just use any of these libraries in...
I have units set to inches and "User set grid spacing" set to 0.050". Wires snap just fine to this grid, but standard components, such as "01- Quad NAND gate"...
Another question, different subject. I am having trouble printing. Set printer up for A4, Landscape. Set program up to A4, Landscape. Printer is a Xerox laser....
Solution: Use the standard grid(s). Using v2.50.10:- Changing the grid from the default values sometimes has the effect of putting the pins of components...
Put it another way. If I was drawing a schematic on a drawing board, if I wanted Landscape, I could unpin the drawing and turn it 90 degrees and pin it back...
I planned to use the "PADS" netlist format (.net file out of TINYCAD) and import that into PADS 2007 ... but the file format is obviously different. (They...
Hi, Under Win XP, the <tinycad.exe> file is installed in <C:\programs\tinycad> and the files created end up in <C:\documents and settings\my documents>, in...
PADS will complain about any netlist that doesn't have a "valid" version number - and that means it complains about most third-party net lists. If you want to...
You should have a 'Fit on a single page' checkbox at the bottom of the print dialog. This should do what it says. When printing I do not alter any default...
