Loading ...
Sorry, an error occurred while loading the content.

3902RE: [bmw e28] Clutch work tips

Expand Messages
  • Doug Dykaar
    Oct 4, 2005
      Larry, et al.,

      While the tranny was out, I had a friend machine bronze bushings to replace
      the worn out plastic crap the factory used. I removed the whole assembly and
      left it with the machinist.

      Mine was definately the throwout bearing. Only made noise when the pedal was
      depressed, even in neutral. The bearing was not sealed, so no surprise it
      failed first. plenty of material left on the clutch plate, so the bearing is
      a poor match for the rest of the parts. Feh.

      Regards,

      Doug

      86 951 http://www.pcaucr.org/pcaucr/forum/post.jsp?postid=2393
      85 e28 535
      94 855 turbo wagon
    • Show all 6 messages in this topic