Loading ...
Sorry, an error occurred while loading the content.
 

Leaking injectors (was temp sensors)

Expand Messages
  • okareka12000
    Thanks for the advice David. Is there an easy way to check/fix the problem? Dave NZ
    Message 1 of 2 , Jun 6, 2005
      Thanks for the advice David. Is there an easy way to check/fix the
      problem? Dave NZ
    • david patterson
      Start with the cold start injector(valve)!Also inspect the thermo time switch as this is what gives the cold start injector its ground to operate! The
      Message 2 of 2 , Jun 6, 2005
        Start with the cold start injector(valve)!Also inspect the thermo time switch as this is what gives the cold start injector its ground to operate! The injectors on the other hand need the pulsed ground from ECU to spray.No REAL EASY way to test but to remove the fuel rail but I am still
        leaning towards the cold start injector!!!Do this with engine cold because the cold start injector will not spray if temperature is over 95 degree F.If you want to check temp sensor 2 ,the resistance should be 2000,3000 ohms @ 68 degree F. And if you want,check temp sensor 1
        on the air box and it should be 2100 to 2900 ohms @68 degree F.

        David

        okareka12000 <okareka12000@...> wrote:
        Thanks for the advice David. Is there an easy way to check/fix the
        problem? Dave NZ




        To unsubscribe from this group, send an email to:
        bmwe28-unsubscribe@...





        ---------------------------------
        Yahoo! Groups Links

        To visit your group on the web, go to:
        http://uk.groups.yahoo.com/group/bmwe28/

        To unsubscribe from this group, send an email to:
        bmwe28-unsubscribe@...

        Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


        __________________________________________________
        Do You Yahoo!?
        Tired of spam? Yahoo! Mail has the best spam protection around
        http://mail.yahoo.com

        [Non-text portions of this message have been removed]
      Your message has been successfully submitted and will be delivered to recipients shortly.