Loading ...
Sorry, an error occurred while loading the content.
 

My Brakes are going to break me!

Expand Messages
  • garygeorge3
    Hi guys, Last month I wrote about my Braking problems, the general advice was to replace the accumulator. I have replaced the accumulator, the regulator and
    Message 1 of 1 , 1 Nov 08:18
      Hi guys,
      Last month I wrote about my Braking problems, the general advice was to replace the
      accumulator.
      I have replaced the accumulator, the regulator and switches, the braking system was then
      bled through.
      I still have a hard pedal and the pressure warning light blinks at me when I touch the
      brakes.
      If I remove the top from the power steering reservior and pump the brakes the fluid level
      does not drop, therefore I have very little hydraulic pressure.
      Because I used a cheaper pattern part for the accumulator, I have been advised to replace
      this again with a genuine BMW item, all other bits are geniune BMW parts.
      Does anyone have any ideas or suggestions, the pedal still feels like it's the accumulator,
      going hard, a delay for a second and then brake pressure is available.
      Please let me know if you have any thoughts and thank you all for your help so far,
      Gary.
    Your message has been successfully submitted and will be delivered to recipients shortly.