is the fcd proper grounded??? otherwise the long antenna cables could act as antennas ... just an idea (adding a ground wire towards station ground helped me adg9bfc
... Gabriel, This seems to indicate that a strong signal, maybe well away from the frequencies you use, is overloading the FCD when received by your outsidealanzfq
... Is this on all frequencies? ... Do you have any other RX to test? ... If you have a strong signal very close it might cause your problem. Move the FCD andbibuggy
The new FUNcube Dongle Pro+ offers the following features and enhancements:
o Full coverage of all amateur bands from 136kHz through HF, 6m, 2m, 4m, 2m, 1.25m, 70cm, 33cm, 23cm (150kHz-240MHz and 420MHz-1.9GHz, 70kHz-150kHz coverage through your software’s NCO offset)
o 0.5ppm TCXO
o 192kHz sampling rate
o Eleven discrete front end filters
o Super sharp SAW filters on 2m and 70cm
o No extra device drivers
o Mid October 2012 availability
FCD/FCDPP Wiki - for your answers see: http://funcubedongle.pbworks.com
You can register your interest at https://funcubedongle.3dcartstores.com/FUNcube-Dongle-Pro_p_8.html where you’ll receive personal email notification of product availablity.
- Amateur and Ham Radio
- Sep 21, 2012
- This is a public group.
- Attachments are permitted.
- Members cannot hide email address.
- Listed in Yahoo Groups directory.
- Membership does not require approval.
- Messages from new members require approval.
- All members can post messages.