Loading ...
Sorry, an error occurred while loading the content.

Re: Can the sprog find a lost cv??

Expand Messages
  • marktate7565
    ... Thats great to know Andrew thanks at least its still there i will just need to change the cv then? Regards Mark. ... Thanks paul i will try that when i
    Message 1 of 4 , Jul 24, 2011
    View Source
    • 0 Attachment
      --- In sprog-dcc@..., Andrew Berridge <andrew.berridge@...> wrote:
      >
      > You could use DecoderPro and ask it to get the SPROG to read back all the
      > CVs. It should understand what each of them is for too. Then you can find
      > out which one you should change.
      >
      > Remember that CVs are configuration variables. They are numbered, and have
      > values. The value in each numbered variable or "slot" configures the loco
      > decoder to do something.
      >
      > Andrew B
      Thats great to know Andrew thanks at least its still there i will just need to change the cv then?

      Regards Mark.
      >
      > On Sun, Jul 24, 2011 at 9:56 PM, Paul O <pomilian@...> wrote:
      >
      > > **
      > >
      > >
      > > Mark, the CV's not lost, just the value has changed.
      > >
      > > Sprog in itself can't recover the value.
      > > If you were using Decoderpro and you saved the CV values to a file for that
      > >
      > > loco, then yes you can recover it by loading that file and writing the
      > > value
      > > from the file back to the decoder.
      > >
      > > If you haven't saved the CV's anywhere then the only thing you can do is
      > > try
      > > different values until you get the loco starting the way it used to.
      > >
      > > Paul O
      Thanks paul i will try that when i recieve my sprog 2 kit.

      Regards Mark.
      > >
      > > ________________________________
      > > From: marktate7565 <marktate7565@...>
      > > To: sprog-dcc@...
      > > Sent: Sun, July 24, 2011 2:53:14 PM
      > > Subject: [sprog-dcc] Can the sprog find a lost cv??
      > >
      > >
      > > Hi my emu has a loksound micro v3.5 olivias sound 4cep on. sometime ago i
      > > lost
      > > the start up cv
      > >
      > > through leaving my emu on the programing track whilst programing another
      > > loco,
      > > Nigel did explain to me about it , but i was wondering could the sprog 2
      > > locate
      > > that cv, so i can put it back to where its supposed to be ? i was using my
      > > powercab.
      > >
      > > Regards Mark.
      > >
      > > [Non-text portions of this message have been removed]
      > >
      > >
      > >
      >
      >
      > [Non-text portions of this message have been removed]
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.